Hello Chaps,
I am looking to replace the peeling spout of my kitchen tap (not the entire tap).
The local hardware store says they only do entire taps (and warned that majority other shops also only do complete taps).
So where can I buy one of these spare spouts?
HI there,
I'm not a plumber but am considering changing the kitchen mixer tap as I think its not working right, but Im not sure;
Its a mixer tap, but the hot and cold water come out of the end unmixed. Theres no aerator on the end (nor any threads wher eone may have been/ may be fitted) and...
mr_p_mart
Thread
cold
could
flow
hot
independent
kitchen
mixermixertap
mixing
pressure
tap
water
Hi I have a traditional basin mixer tap both handles are now loose and spin freely without turning the water on or off.
How do I fix this issue? Can I replace the handles or do I need to replace the entire tap? Also, is this an easy DIY job or should I get a plumber?
Thanks a lot,
Davie
DavieB
Thread
basin
broken
handles
help
mixermixertap
reviver
screwfix
spares
tap
traditional
I've just replaced a mono block kitchen mixer tap for a customer that said his old Tap intermittently released a bust of water through spout, I advised him to buy a new replacement tap as I believed the cartridge maybe on the way out.
I then installed a identical looking tap that he'd had...
Hi there, I'm hoping somebody can give me some advice on a problem I have created for myself.
I fitted a new (cheap) mixer tap yesterday, and now I think I have an airlock on the hot water tap.
I've made a couple of videos to try and make it easier for anybody trying to help.
Apologies for...
I have fitted a mono block mixer tap to my basin and are having issue when turning the cold water on.
A noise comes from the tap even when using the mixer, but the hot water is silent. I have done the following:
removed and cleaned the cartridge. still no change in noise.
flushed out the tap...
garyng10
Thread
basin
fitted
issue
mixermixertap
noise
pressure
tap
turning
water
Hi there,
I have an old Damixa mixer tap in my kitchen and it is dripping. I can't however get to the headgear nut as it is encased in two plastic mouldings, one of which is the inside plastic bit of the tap handle and turns the tap on and off when turned. Does anyone have any idea how I get...
Hi all,
I hope someone can shed some light on my problem. I am trying to fix a dripping kitchen tap. I've taken the handle off one side of the mixer tap and instead of being able to get to the headgear nut it is covered by two plastic pieces that stop me being able to get to it. One is the...
Unregistered
Thread
being
changing
handle
kitchen
kitchen mixertapmixermixertap
receive
register
tap
washer
Hello,
Hoping someone can help me. I have a Secta bathroom mixer tap from Victoria Plumb https://victoriaplum.com/product/secta-basin-mixer-tap27 and i've taken off the top of the right hand tap but i can't for the life of me work out how to get the sleeve off the tap fixing. In the picture on...
Silvabell25
Thread
apart
basin
can't
leaking
mixermixertap
taken
tap
turning
I have an old mixer tap that is leaking quite badly from the centre lever. I have tried taking the leaver off by removing the centre bolt but can't seem to pull the lever off even when the bolt is removed. Any ideas?
Hi all.
I have zero plumbing knowledge. Basically, fitted a new mononloc tap in kitchen as it was causing problems not isolating the cold feed. Water is now fine (heating was never affected, ideal combi). I know I've fitted it correctly under the sink as the hoses would only go on one way, one...
I am thinking about replacing my standard Bath/Shower mixer with a Thermostatic one, however I am a bit put off and confused by the talk about different pressures. I live in a first floor flat with one flat above me, my bathroom cold water is fed from a communal tank on the roof which must be...
Kevin Shulver
Thread
about
advice
aqualisa
cold
combi
heating
hot
mixermixertaptap
thermostat
thermostatic
water
Grohe Get Monobloc Mixer Kitchen Tap Chrome | Kitchen Mixer Taps | NoLinkingToThis
Fitted it today. Customer had that style of tap and wanted same. Swirl ones look cheap to me and the Bristan comes with one of those dodgy easy fit kits. Only fitted few Grohe things previously and all were solid...
Hi all,
first post so so please be gentle!!
Our tap in the bathroom was dripping from the nozzle. I went to isolate it so I could get the cartridge out so I could get the right one and water started pouring out of the screw which did stop when I opened it up again. Because of the way the...
Hello, can anyone help identify the make and model of this kitchen mixer tap, installed around six years ago? The washers have pretty much worn away and we're having trouble getting the correct replacements that fit, so wondered if we need a special type designed for this tap only.
Cheers :-)
my mates mixer tap in the kitchen just turns and no hot water comes out, the cold water is running fine , do i have to change the whole unit or can this be fixed . please advise
Hi,
I recently had an electric shower put in above my bath which works okay but the low water pressure is driving me mad. I have long hair and have resorted to washing the shampoo out under the bath taps! As I have just paid for the electric shower I don't want to spend much more money so I've...
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.