Search the forum,

Recent content by miketurner201

  1. M

    Recommended pressure bar to re pressurise system?

    Good to know, many thanks.
  2. M

    Recommended pressure bar to re pressurise system?

    Ok, so let out some pressure via the radiator bleed valve, if necessary, many thanks
  3. M

    Recommended pressure bar to re pressurise system?

  4. M

    Recommended pressure bar to re pressurise system?

    Hi, I have a new boiler Ideal "Heat only" 24kw with a new Indirect unvented hot water cylinder and two expansion tanks. The plumber who fitted the system a few months ago told me how to re pressurise the system by opening two valve taps to introduce mains fed cold water to the system and...
  5. M

    Shower knobs (posts) should they be the other way up (down)

    My bad, they don't completely rotate but just wanted to know which way up?
  6. M

    Shower knobs (posts) should they be the other way up (down)

    Hi. Should these shower knobs be facing down instead of up. They seem to foul one another if turned completely.
  7. M

    Salus MP100 pump replacement

    Hi, yes I see what you mean. Though my existing pump Salus MP100 which probably cost around £50 has only lasted 14 years so I will probably stick with a new Salus MP200, but thanks for the info.
  8. M

    Salus MP100 pump replacement

    will have a look. A bit too pricey for me at £138 whereas the Salus MP200A is £60 Thanks for the suggestion but I can’t justify that cost. Hopefully I will get other suggestions.
  9. M

    Salus MP100 pump replacement

    I think my old Salus MP100 circulating pump maybe on the way out. Sounded a little noisy and now I’m getting an error (no water flow) message on my new Ideal heat only boiler and it’s not coming on. Ideal engineer coming next week. I see there is a new model MP200A which I may get it swapped...
  10. M

    Removing thermostatic valve to clean

    I have a thermostatic concealed shower and would like to remove the thermostatic valve and look to clean any debris as it doesn't appear to be getting very hot, other showers are fine. It's around 6 years old. It was installed by a plumber and bought from a company in Wales, have been told it...
  11. M

    15mm gas supply to new 30kW system boiler - OK?

    Sorry I posted this in the wrong thread.
  12. M

    Power flush before or after fitting new boiler

    Thanks, yes I will ask him when he comes in a couple of months. I've been asking him lots of questions lately so maybe I will give him a chance to recover. Thanks again
  13. M

    Power flush before or after fitting new boiler

    My plumber's quote for fitting a new boiler (Ideal Logic Max Heat only 24kw) says he will "use a power flush machine that will flush all the black dirty water once the new boiler is installed and add heating inhibitor" Is that correct ? will it send the sludge etc into the new boiler or should...
  14. M

    15mm gas supply to new 30kW system boiler - OK?

    Plumber had gone for a 24kw now as that’s the same as the old one.
  15. M

    Grohe shower unable to get warm/hot

    Hi My daughter has a Grohe mixer shower (see photos) and however I try to mix it to warm / hot it only just manages slightly warm or cold. I don't know how old it is as it was already fitted when they moved in. Can anyone suggest what might be the problem. Other showers are fine so I think it's...
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Tiling Tools for Beginners
Tiling Tools
Contractor Advice Forum
Electricians Talk
Tile Blog
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock