Search the forum,

Discuss Grohe shower unable to get warm/hot in the Bathrooms, Showers and Wetrooms area at PlumbersForums.net

Messages
59
Hi My daughter has a Grohe mixer shower (see photos) and however I try to mix it to warm / hot it only just manages slightly warm or cold. I don't know how old it is as it was already fitted when they moved in. Can anyone suggest what might be the problem. Other showers are fine so I think it's just this shower that has a problem. The levers to turn on the water and adjust hot/cold are not stuck and work well but no hot. Any advice appreciated, thanks.

Ps. However hard I try I cannot get the pictures to be the right way up.
 

Attachments

  • tempImage46NKqE.png
    tempImage46NKqE.png
    2.5 MB · Views: 6
  • tempImagedmN9KR.png
    tempImagedmN9KR.png
    3.2 MB · Views: 8
  • tempImagenD6Gw9.png
    tempImagenD6Gw9.png
    3.6 MB · Views: 5

Reply to Grohe shower unable to get warm/hot in the Bathrooms, Showers and Wetrooms area at PlumbersForums.net

Similar plumbing topics

The fittings below are for a mixer bar attached to a self contained shower. i.e not a wall. The attaching screws have snapped. I could get two new brackets, dismantle that existing one and start again or I could try and re attach via those screws, removing the broken ones from the plate and wall...
Replies
1
Views
175
Hi, Can anyone advise as to why the cold water to my bathroom keeps airlocking? This originally happened about 12 months ago and has happened 3-4 times since. It’s an upstairs bathroom, fed from a tank in the attic. The tank is about 8 Meters away and feeds a bath, sink and toilet. The tank...
Replies
9
Views
301
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock