Discuss Stripped Gland nut on stopcock in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
?

****

Hi all, I Stripped the gland nut on stopcock like an idiot. I did not pack the gland properly and kept tightening the nut to stop the drip, by doing this i destroyed the nut.

Do i have to freeze the pipe in order to replace the stopcock or is there a way of removing the gland nut?

At least there's no water exploding out of the pipe!

thanks :)
 
Not sure if **** counts as a name but can you turn the water off outside then replace it?
 
I presume you mean the incoming stoptap ,if so you should have a external stoptap that you can hopefully turn off and replace the inside one
 
Hi all, Its a council estate so i can't turn off the mains. Would the only option be freezing the copper pipe?

also thanks for the fast replys :)
 
I looked for where the pipe came from and theres no stopcock. It just goes through the building and branches off to each kitchen/flat.
 
Hi, I wasnt trying to be rude. I will change it later. Didn't think really
 
How will the water be turned off in an emergency

Call the water undertaker & ask them come & turn it off. Then when they arrive watch where it is. Simple
 
So there will definalty be a mains stopcock somewhere in the flat? I can only find the sink kitchen, bathroom sink/bath and toilet system stopcock
 
Status
Not open for further replies.

Reply to Stripped Gland nut on stopcock in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Newest Plumbing Threads

Back
Top