seized bayonet

[ambrosia]

does anyone know any tricks to free a seized bayonet

had an old lady whos cooker was 40 years old (she still had the paperwork), the hob had become seriously dangerous

The bayonet hadnt been disconnected for those 40 years and wasnt shifting, pipework was barrel so if i'd cut the bayonet off I didnt have anything to cap it or put a new thread to the pipe.
To make matters worst someone had tiled behind so it was impossible to get enough room to get a grip on the bayonet

Bit of heartbreaking job, couldnt get the oldlady to understand that the cooker was dangerous. Didnt actually have permision to touch it as i was only there for a CP12 and to look at landlords appliances
she was on an assured tennancy so there was no way the landlord was ever going to replace her cooker and she clearly couldnt afford one herself.
It was bank holiday weekend and i was desperate not to turn a vunerable 82 year old ladys gas off and leave her without heating and hot water

 

[Simon F]

I was taught that a bayonet is for tempory removal only.
would have thought in this case you would need to cap the pipe anyway until a new cooker is fitted.
if you did spray some release spray and get the fitting out what's to say it wouldn't be leaking anyway?

 

[ambrosia]

youre right

it just it was a difficult situation thats been playing on mind

 

[SafeGasInstall]

tricks with gas ???

get new one is only £5

 

[mikegas]

I think he trying to remove the bayonet fitting Stan to cap the supply. I think you can leave a bayonet as a permanent isolation if you prove it's not passing

 

[glenno1]

You could try this turn the gas off and disconnect bayonet spray with wd40 or similar leave for couple of minutes then give it a tap with a mallet or hammer,hope this helps

 

[SafeGasInstall]

just re read the original post !
I am sorry pls ignore my 1 st post .
My need to cut house down and apply some wd 40 or 3 in 1 spray ! I had simmar problem and when I finnaly had it out it turn out it was damaged I supposed some one was trying in the past to pull it out without twisting it !

 

[stani]

Is,nt it the fact that the bayonet can't be disconnected or ami reading this thread wrong

 

[SafeGasInstall]

I think he trying to remove the bayonet fitting Stan to cap the supply. I think you can leave a bayonet as a permanent isolation if you prove it's not passing

Thank you for your post mate ! Made me fully read the original post

 

[Mike Jackson]

does anyone know any tricks to free a seized bayonet

had an old lady whos cooker was 40 years old (she still had the paperwork), the hob had become seriously dangerous

The bayonet hadnt been disconnected for those 40 years and wasnt shifting, pipework was barrel so if i'd cut the bayonet off I didnt have anything to cap it or put a new thread to the pipe.
To make matters worst someone had tiled behind so it was impossible to get enough room to get a grip on the bayonet

Bit of heartbreaking job, couldnt get the oldlady to understand that the cooker was dangerous. Didnt actually have permision to touch it as i was only there for a CP12 and to look at landlords appliances
she was on an assured tennancy so there was no way the landlord was ever going to replace her cooker and she clearly couldnt afford one herself.
It was bank holiday weekend and i was desperate not to turn a vunerable 82 year old ladys gas off and leave her without heating and hot water

This might sound a bit harsh but why hadn't you got anything to cap off the barrel? If you're working on gas you should always have fittings to safely cap pipe work in case you need to cap off a dangerous appliance. Even more so if you're out doing CP12s.


Sent from my iPad using Tapatalk HD

 

[mikegas]

Is,nt it the fact that the bayonet can't be disconnected or ami reading this thread wrong

Think you might be right lol

 

[SimonJohns]

This might sound a bit harsh but why hadn't you got anything to cap off the barrel? If you're working on gas you should always have fittings to safely cap pipe work in case you need to cap off a dangerous appliance. Even more so if you're out doing CP12s.


Sent from my iPad using Tapatalk HD

Just keep a set of meter disks.

 

[ecowarm]

everybody should have a 1/2" plug at the bottom of the tool bag/ box

 

[REDSAW]

if its on barrel then get the grips and hammer out and give it a whack.

crikey! just thought, thats one old cooker then?

 

[Mike Jackson]

Just keep a set of meter disks.

That's going to go down well with Mrs Jones when you turn her heating off because she's got a fault with her cooker.