Wet vac ??

[scotty plumber]

Guy's, i've been plumbing for 9 and a bit years, work with about 7-8 different plumber's, but it wasn't until i got on to this forum that i have learned about the wet-vac?? Tell me more please, i do domestic plumbing like maintenance,repairs and the odd bathroom and kitchen! Thank's in advance

 

[rocketmanbkk]

Hello Friends

Is this one any good do you think?

DeWalt DC515N Wet N Dry VAC 18 Volt Bare Unit

Cheers

Rocket

 

[Pipes Plumbing]

I wouldn't bother with a little battery one it won't hold hardly any water and the batt will last 2 minutes...
The Wickes one is popular... I use a Charles (Wet version of Henry) as I got it free.

 

[wiggers]

Wickes have one for £30 has anyone used it ?

 

[Guest123]

Mines is a Karcher from Screw fix. Used mainly to suck the remaining water out of a wc cistern when doing a syphon or fill valve change. Good for emptying loos for removal and for cleaning up the job. The karcher also allows for dust extraction and I can connect my table saw, jigsaw, router and anything else that has a hose attachment and it also has an extra power supply to connect tools.

 

[steveafoss]

I use the Karcher got it from tesco £50.00 direct and paid using tesco vouchers and delivered to local store for free

Steve

 

[AlexGas]

I use VAX - does the trick for me, 10 quid from a car boot.

 

[AlexGas]

Wickes have one for £30 has anyone used it ?

I've used it. As long as you use it on wet only, it's OK. Sometimes it is a pain to put the air filter on properly for the dry mode. If you are not careful - the room will be full of dust. DOH!

 

[Pipes Plumbing]

I'm considering making a bit of a mod to mine soon because it doesn't hold that much water (even though it's a big old beast)...
Thinking of fitting a flange to the base of the tank into a a full bore valve out to a hose barb.

What I'm thinking is that when I'm trying to drain a rad or some awkward pipework that holds more water than the vac, I'll be able to run a hose to drain and when the vac fills up put my thumb over the rad tail / pipe end, switch off the vac and open the valve to dump the contents down the hose to drain....
Will only take one hand to flick the vac off and open the valve for a minute... Should help to keep the job nice and speedy without the extra mess or hassle of having to re seal a joint to go and empty the vac

What do you guys reckon, good idea or pointless pondering by a tired bloke?

 

[PlumbBobBob]

sounds like a good idea pipes

 

[Pipes Plumbing]

Will chuck a couple of pics up when it's done, either of my newly improved or newly broken vac!

 

[goz666]

I always used to keep a wet/dry vac in the van but just for servicing purposes and never used the vac as a wet vac, now after reading this am kicking myself because I gave it away a few years ago due to lack of use and now the ideas for using the wet side have just convinced me that I need to invest in another one.

 

[tamz]

Never needed one in 38 years so i think i can manage without one for another 10 or 12 or however many until i retire on drop.

 

[goz666]

Never needed one in 38 years so i think i can manage without one for another 10 or 12 or however many until i retire on drop.

Thats what my mate said when I asked him to invest in pipe benders all them years ago, whats wrong with the spring and yer knee they been ok for me for the last 40 years. ?? Anyway he bought them and still he used his spring....lol.

 

[tamz]

He's just used to it and it is hard to teach an old dug a new trick. When his knees are too sore he will learn :smile:

BTW Welcome along here Goz666 (i'll call you Goz). Hope you enjoy this place but it can get addictive :lol:

 

[AlexGas]

Never needed one in 38 years so i think i can manage without one for another 10 or 12 or however many until i retire on drop.

Hi tamz!
How do you empy a rad without spilling much water?
And does it mean you use compression fittings where you could use the end feed?