Discuss combi to combi £800 fitted in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.

johnnyplumb

Plumbers Arms member
Plumber
Gas Engineer
Messages
919
This advert has been in our local newspaper for a few weeks now advert.jpg It surely can't be done for these prices.
 
Last edited:
Cheapest Vokera round here will cost you £600 with the vat, pipework & fittings generally even on a relativley straight swop would be minimum of £30 - £50. He is obviously one of the idiots who doesn't value his skill and wants to work for peanuts or a clever marketing ploy to get a foot in the door.
 
All I can say if you can supply and Finnish the instal for that money I will give you a job

there are tons of guys who can do a combi swap in 3-5 hrs so £300-400 for that kind of money is not too bad, wait till tam sees this thread he used to do boilers in half a shift, mind you that was in the 70's when he was fit
 
He'll end up wasting his own time as surely the punters are not that stupid to fall for this advert

There was a woman on last week who got a boiler service for cheap through a groupon ad. It ended up with a bill for £1300 to fix a leak!
That is some big footwork lol
 
there are tons of guys who can do a combi swap in 3-5 hrs so £300-400 for that kind of money is not too bad, wait till tam sees this thread he used to do boilers in half a shift, mind you that was in the 70's when he was fit
aye, i've seen the 3hr boiler swappers, most leave right mess.
 
Yeh I agree but I am not into that in and out thing (age probably) I like to do my thing my way if it takes 1 or 2 or 3 hours then so be it
PS I am not sure if I am as strong as tamz as I used to drag the old boilers not lift them
 
its easily done in 3-5 hours and the place is often left cleaner than when i first go in !
To be honest if your taking 8/9 hours to do a combi combi swap then you must spend half the day looking at the job rather than actually working !!
 
aye, i've seen the 3hr boiler swappers, most leave right mess.


ooohhh tam will bite you for this comment, i'm telling you there are tons of guys who can/could do it, and leave a top class job, depoends whats in and what goes in, its all about being organised, doing one thing on auto pilot, starting the next one with one hand and thinking about the thing after that, loads of guys in a 2 man team used to do a great one day install on an indirect system with a new cylinder and control pack, with F&E tank in the loft and quite often a new BBU
 
Can still do them in a day with a powerflush, gas upgrade, condensate, and wash the dishes!

Fit to drap!

On the other hand i'm doing a bbu to regular swap for an old couple atm so had to keep the heat on for them.
Yesterday hung the boiler and ran the pipes just ready to T in, new pump and S plan on and gas run halfway while the boy played at powerflushing and blethered to the old guy.
Cut the old one off today and swapped the pipes about, wired it up and got it running by about 3.
Take the old fire and boiler out tomorrow and brick up and plaster the fireplace.

Sometimes you just need to pace yourself :smile:
 
if your working on less than a £200 profit margin, you would need to be doing them in 3-5hrs better to charge more and spend longer at it.
 
Status
Not open for further replies.

Reply to combi to combi £800 fitted in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock