Discuss What we all working on this week ? in the Plumbing Jobs | The Job-board area at PlumbersForums.net
What made you buy shares in Stanley?
Mine looked like that about 3 hours before posting the above picture mate. I feel your pain.
The optimaxx ones you can see mate? I use them on any woodwork I need to do. They sit flat to the surface.
The big ones I got about 15 years ago from a well known diy store with only 2 letters from the alphabet in its name. They were on offer. I think they were £12.00 for 3, so got 3 sets. The smaller ones I have I got for an absolute Steal. Got about 32 of them for £10.00 (and they are brilliant. They interlock with each other with side clips)What made you buy shares in Stanley?
You’ve lost me. Put a circle around them mate.
I’m thinking it’s these?
Viessmann 100 w wi fi enabled going in taking alot to sort the system out in the loft bonus is lots of copper came out. Kop
I’m not picking, but is that magnaclean accessible? Looks close to ceiling.
Yeah it's got another 300mm above it
Was best place for it, otherwise pipes below boiler would of needed to come lower to accommodate it there.
I'm concentrating on smaller projects involved in two new kitchen refit jobs and doing my own one as well, a cloakroom remodel which has been a pita floor had to come up to gain access to the services heating pipe needed tidying up and first fixing ready for new designer style rad and towel rail , stopcock needed moving from the corner all services needed altering and first fixing, then studding out the wall to hide everything plasterer coming Monday so a late one for me tonight as working at home tomorrow, had to dig out the external stopcock chamber got it shut off did the alterations then couldn't get it back on 
Essex and Suffolk water had to come out they were first class the inspector snapped the Handle off the stopcock trying to get it turned on but had a tool to get over it replacement can now be booked for a later date. Kop
Nice Mr Evil I'd be consered about the towel rad being there can see it rusting ? but the customer gets what they want ,9 days is a quick turn around mate well done regards kop
Yes you're probably right. A stainless one was considered, but at over double the price it seemed a lot extra. Considering that if there was excessive water down that end it'd be coming out the tray and into the room I was hoping it'd be OK, thrown in the fact good extraction, and it's a Zehnder not some cheap s***, fingers crossed
Very nice.
Reply to What we all working on this week ? in the Plumbing Jobs | The Job-board area at PlumbersForums.net
