Fibreglass 5 gallon tank

[Sharp Point]

Evening all,

Where would one source one of these, are they available?

Thanks

 

[townfanjon]

Fibreglass ?? What for ??

 

[Sharp Point]

Lol.... I knew somebody would have to ask. About to start the plant room of a large new build in the basement, my plan is to put both the pressure relief’s from the unvented and boiler into it, have a 1” overflow from it into a sanicom 2.

 

[Sharp Point]

And yes the sanicom can take very hot water for short periods, but me and the customer are thinking of ways to activate an audible alarm to detect if the unvented blows off the temperature relief valve into it. Maybe a heat sensor on the lid of the tank or a float sensor to start the alarm

Dunno, just trying to cover all bases

 

[ShaunCorbs]

Sani con not rated for boiler or unvented or condy That's what I was told from sani

Have a look at pump house

@rpm

 

[Sharp Point]

Sani con not rated for boiler or unvented or condy That's what I was told from sani

Have a look at pump house

@rpm

We had the saniflo rep out on site in the boiler room , who specc’d the sanicom2

 

[townfanjon]

We had the saniflo rep out on site in the boiler room , who specc’d the sanicom2

Worth knowing if its true , as Shaun says , the only one I know of is pump house

 

[ShaunCorbs]

We had the saniflo rep out on site in the boiler room , who specc’d the sanicom2

So it's rated at 100dc for 30mins plus ?

 

[Sharp Point]

It says 90 degrees intermittently Shaun

 

[ShaunCorbs]

It says 90 degrees intermittently Shaun

So no then not acceptable for an unvented

 

[Sharp Point]

So no then not acceptable for an unvented

It was specc’d by the sales rep Shaun

 

[ShaunCorbs]

It was specc’d by the sales rep Shaun

If rpm confirms it I will eat my words

 

[Sharp Point]

If rpm confirms it..... the Rubbish is going to hit the fan, as it’s already been bought. The rep was quite memorable, he didn’t shut up lol

 

[Sharp Point]

I’ve never known of a temperature relief valve go off, not saying they don’t .... but the high limit would kick in and close the zone valve and within 10 minutes cold water would’ve emptied the hot water, that’s why I’m asking about the fibreglass tank with copper overflow.
Have you lot thought of the 1000’s of f&e plastic tanks on solid fuel systems, that hold near boiling water

 

[ShaunCorbs]

I’ve never known of a temperature relief valve go off, not saying they don’t .. but the high limit would kick in and close the zone valve and within 10 minutes cold water would’ve emptied the hot water, that’s why I’m asking about the fibreglass tank with copper overflow.
Have you lot thought of the 1000’s of f&e plastic tanks on solid fuel systems, that hold near boiling water

What happens if port valve fails have to design system to cope when they fail

Also solid fuel are specd at copper or steel also copper floats