Users can remove all display ads (not sponsors) for a small fee. Click for info (must be logged in)

F1 fault code on morco fed24ed3

Discuss F1 fault code on morco fed24ed3 in the Gas Engineers Forum area at PlumbersForums.net

I

Illuminate

illuminate
Messages
73
Morco feb 24ed3 has a f1 fault code. The burner reading is fine. The fault is intermittent, sometimes the boiler won't ignite on either hot water or heating. Everything seems to run but it just fails to ignite. I've changed the rectification and the spark electrodes. Cleaned the burner and the injectors and the burner pressure seems fine. I've also cleaned the venturi and tested that the spark generator is getting the correct voltage at j25 on the pcb.

Any help welcome?
 

Reply to F1 fault code on morco fed24ed3 in the Gas Engineers Forum area at PlumbersForums.net

Similar plumbing topics

F
  • Question
No Hot water, Fixed and Broken Again Ideal Logic 24
Ideal Logic 24, Previous problem was that the hot water was only cold or barely warm if the heating was in use. If heating was off and boiler cold...
Replies
2
Views
209
Lou
Lou

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock