Expansion vessel - not ugly

[ShaunCorbs]

Who installed the cylinder?

 

[Harvest Fields]

Who installed the cylinder?

Should of been upgraded at the same
Time really.

 

[Ric2013]

I installed the cylinder. The Feed Cistern was separate from the CWSC shown and I did fit a new Combined Feed and Cold Water Storage cistern in the loft. The cistern shown does not, and never has, fed a cylinder.

However, as I understand that a flush valve operated WC is no longer permitted to be installed in domestic settings (if, indeed it ever was), I felt the best course of action was to leave that installation as it was and so nothing on the WC side has been changed.

NB - THE SPEEDFIT TO COIL WAS TEMPORARY, TO ALLOW HOT WATER OVERNIGHT IN PREPARATION FOR A DEDICATED CIRCUIT TO THE DHW CYLINDER! Don't want you to think I'd be happy leaving it like that

What would you have done?

 

[ShaunCorbs]

I see thought someone had changed the cylinder and left the feed the same

 

[Ric2013]

God no. This was the feed cistern:

The pipe elbow on the left is the vent, the pipe insulated and covered in string is the gravity feed from a home-made solar panel running direct into the feed cistern, and the ballcock is over on the far side where there is literally no access. (As I said, how on earth do you expect me to service that ballcock when I can't so much as touch it with an extended arm?) Amazingly, there is actually a lid (moved further to the right when I took this picture), but it has a slot cut in it for some obscure reason.

I replaced the cylinder and cistern and commented that the bathroom pipework was restrictive but we'd try leaving that for now: the hot water flow increased from 6l/min to 14l/m at the bath tap and the customer said that was more than good enough for her, plus the water actually gets hot now!

 

[ShaunCorbs]

Old school soldered patch as well