R
REDSAW
bought one of these as customers bath tap handles had lost the splines.
the nearest bush that would fit the tap was not the same as the valve body, although at first it looked to fit.
it seems the thread bore is 3/4'' and not 22mm one way or the other. does this seem right and can you get imperial adapters?
any one else come across it before?
the nearest bush that would fit the tap was not the same as the valve body, although at first it looked to fit.
it seems the thread bore is 3/4'' and not 22mm one way or the other. does this seem right and can you get imperial adapters?
any one else come across it before?