Search the forum,

single pipe system

A Single buoy mooring (SrM) (also known as single-point mooring or SPM) is a loading buoy anchored offshore, that serves as a mooring point and interconnect for tankers loading or offloading gas or liquid products. SPMs are the link between geostatic subsea manifold connections and weathervaning tankers. They are capable of handling any tonnage ship, even very large crude carriers (VLCC) where no alternative facility is available.
In shallow water SPMs are used to load and unload crude oil and refined products from inshore and offshore oilfields or refineries, usually through some form of storage system. These buoys are usually suitable for use by all types of oil tanker. In deep water oil fields, SPMs are usually used to load crude oil direct from the production platforms, where there are economic reasons not to run a pipeline to the shore. These moorings usually supply to dedicated tankers which can moor without assistance.Several types of single point mooring are in use.

View More On Wikipedia.org
  1. J

    1 radiator cold on single pipe system

    The single pipe system comprises 4 downstairs radiators and 7 upstairs. It has worked fine in previous years and all radiators have heated up. It has been dormant all summer and now when kicked into life all the radiators heat up except one. I have removed and flushed out the radiator (very...
  2. T

    An interesting enigma!

    I have a customer who had an extension built 3 years ago and part of this was the inclusion of a very large radiator, to heat his lobby, which has never worked properly. The thing is about 2.5m long with double panels and double convectors whereas all the others in the house are single panels...
  3. W

    Old programmer,rads turn on when hotwater is

    Iv recently moved into a house and the programmer doesnt seem to have a swicth for hotwater/ and central heating seperately, when i turn it on, the rads in the house heat up but i do get hot water. Also there is no cylinder thermostat and the immersion heater doesnt have a fuse in it. HOw easy...
  4. D

    daisy chain heating

    Interesting job the other day gets a call from a customer who had moved house and wanted me to check the boiler, heating etc. Serviced boiler but noticed the furthest away rads were much cooler, at first i thought it was a single pipe system so started to balance out the radiators but then...
  5. S

    1 pipe system and magnaclean!

    Has anybody installed a magnaclean on a 1 pipe system? Where abouts is the best place to put the magnaclean? cheers!!!!!!!!!!
  6. D

    Heated towel rail cold

    Hi - I have recently installed a heated towel rail to replace a traditional radiator on my single pipe system. The rail is approx 1.5 metres from the old radiator and is tee'd into the hot water storage cylinder. The rail does not get hot ! I have drained the system and bled the rail - just get...
  7. W

    Balancing a Single Pipe System

    Hi. Have been asked to look at a single pipe system which is out of balance. Don't have much esperience in them. The first two radiators on the circuit are hot as are two upstairs. The rest are cold or lukewarm. What is the best method of balancing such a system? Should the pump be on a...
  8. L

    2 Cold radiators upstairs

    The radiators in 2 of my bedrooms don't work. One is a single rad and has a thermostic valve on it (actually it has one on both the inlet and the outlet to the rad and both valves are in the max position). The other rad is in a bedroom with two rads, each of which has a thermostatic valve. The...
  9. B

    Hot flow pipe's, cold rads??

    Hello guys, thanks for your interest to read this and maybe have some answers for me, I have a situation with a house's heating, 3 rads downstairs (all separate dropdowns) and two rads upstairs, the rads don't get hot (or even warm) down stairs (but the flow pipes do) and the rads upstairs get...
  10. R

    One pipe and two pipe system ??

    Have a central heating dilema. Current central heating not working properly. Old Oil boiler with flow and return 15mm and pump on return? Is this a one pipe system? Can't tell as tails go into floor from bottom rads (down stairs) Between the pump and the boiler is tees off the flow and return to...
  11. V

    Help & Advice - Vent position

    Hi all, this site has helped me out many times, i've tried a search but getting nothing specific to this question. Just moved into a 1970's property, which is still in the 1970's!! after failing to successfully balance the radiators I thought I had better investigate the system to see where...
  12. W

    combi boiler on single pipe system

    hello everyone, i need some urgent advise on my plumbing/ heating situation. I had a baxi combi boiler fitted onto a single pipe system and everything seems to go wrong. I seem to lose hot water and heating almost every week as the plumber who fitted the boiler keeps to do some work on it when...
  13. J

    Could I have a combi to single pipe system ???

    I have a gas fire / back boiler which seems to be beyond repair as constantly cutting out even after I had new valve fitted. I've had quote for combi but its quite expensive as the current system is single pipe and plumber says if he connects it as it is it will breakdown in 6 months. Is this...
  14. M

    Vaillant Condenser strong enough?

    Hi all, I have a problem with my current old back-boiler system. If I have all my 8 radiators on at one time, the most important one ( downstairs front room -700 X 2000 single rad ) does'nt heat up properly. It is hot around the top and edges but gets less hot towards the bottom. It is a...
  15. J

    2 radiators not working (have bled no air) any ideas

    Hi I have 2 radiators upstairs in my house, running of a gravity fed heating system. They used to work untill recently. I have bled them and theirs water in both. I tried removing the rads and pulling water through each pipe using a hose untill hot/clear water came through, when I re attached...
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock