Discuss Worcester 24 sbi tripping out fusebox and failing to ignite in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
W

whothefunk

Righto chaps

freind asked me to look at boiler as heating is not working

model 24 Sbi 5 years old

it was losing pressure and i replaced PRV however before i did this and still after replacment everytime you try and release pressure it trips out the plug sockets in house,

it fails to light for more then 10 seconds both before and after PRV swap. i have checked all hoses for leaks and air pressure switch seems fine

is this a sensor issue or PCB fault im not into boilers
mainly do piping resites and repair work,

hoping maybe someone has seen similar issue with the Worcester range

it does not do domestic hot water (blanked off on rear has huge immersion heater upstairs )
pumps spins free as a bird stops starts as you would expect fan works ok too.

when i got to it the ch return valve was shut ..... freinds father in law "had a look" :rolleyes:

house was built 2005 never had an issue until two weeks ago.
 
Status
Not open for further replies.

Reply to Worcester 24 sbi tripping out fusebox and failing to ignite in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock