Discuss What is this valve please? in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Messages
9
I'm guessing it's a check valve / non return valve, but I've never seen one like this before. It's leaking and needs replacing. Any advice welcome.

20190306_191134.jpg
 
Nrv normally

But also seen a couple as iso valves
 
It's a verifiable double check valve. The removable test plug is there to check that the valve is working. If you depressurise the upstream section of pipework and open the test point, water should not flow from the opening which shows the valve is closing and preventing backflow from the downstream pipework.

I have the same one on my desk here now. It can be replaced with any kind of modern double check. The only issue is finding one the same length otherwise you may need to alter the pipework to get anew one to fit.
 
Its the end of the winter. If you have hard water then these kind of valves often gum up. So try to energise it now and again over winter etc. Also try to organise it somewhere easy to take off and change or clean.

Roy
 

Reply to What is this valve please? in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock