S
scottbolto
Hello,
Just a quick question.
I have tee'd into a 10mm flow and return and took a new rad off this circuit. When the system is running the flow is bouncing hot to the valve, the top half of the rad is luke warm and the bottom half cold. Flow and return are the correct way round, both bi flow evern if are incorrect. I have turned the other rads off on the circuit (on trv and l/s) however the same problem occurs. I have taken the rad off and took a hose from the return, the flow is pretty good. I have also done this on the flow, obviously there is no blockage. what could the problem be?? Seriously annoying me.
Just a quick question.
I have tee'd into a 10mm flow and return and took a new rad off this circuit. When the system is running the flow is bouncing hot to the valve, the top half of the rad is luke warm and the bottom half cold. Flow and return are the correct way round, both bi flow evern if are incorrect. I have turned the other rads off on the circuit (on trv and l/s) however the same problem occurs. I have taken the rad off and took a hose from the return, the flow is pretty good. I have also done this on the flow, obviously there is no blockage. what could the problem be?? Seriously annoying me.