Currently reading:
Freebie Alert: SQUBE copper tube and fittings

Discuss Freebie Alert: SQUBE copper tube and fittings in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
R

Ray Stafford

Apologies for this coming up so late, but I have only just had the go-ahead from the manufacturer.

Perhaps it means that a different set of members will get the freebies?

Reviewing any past freebie is NOT a requirement for this one, but you do have to be a forum regular, and PM me your snail mail address.

I have an fairly large supply of these freebies which are some samples of the new SQUBE copper tube, and a starter pack of fittings.

Long lengths of tube are quite awkward to send by carrier, so the freebie lengths will be the 1800mm version that they make for the DIY stores.

sqube.jpg

sqube2.jpg



Following the passing of EU directive 10413, from April 1st 2014 the use of high capacity, square section, thick wall tube will be a mandatory requirement for all renewable applications attracting government subsidy.

On the continent, these have been around for a while, particularly in Eastern europe, and SQUBE is the only square section tube currently meeting all european regs.

Overall, I quite like the look of it, although I am not sure if the compression fittings are going to catch on - tightening the square thread requires a specialist spanner and some practice.

Looking to the future, I suppose we have to get used to new ideas, so this is your chance to be amongst the first to work with the latest plumbing technology.


PM me a snail mail address to book your freebie now, but I might not answer until the morning, since its getting late. PMs wil be taken in the order of arrival in my inbox until we run out of freebies.

Cheers


Ray
 
I suppose we could play Russian sqroulette and pull one name out of the hat every day. That would add to the dramatic tension.
 
Why isn't anyone owning up? Surely it's not that embarrassing.
 
Give it up ray, I keep seeing that you've posted and think you have done the idiot reveal. Only to be let down again.

this is one idiot list I'm not on. :)
 
Can't wait to write some Google reviews for them;

"Dave* was really nice and even offered to re-plumb my house with square pipes, apparently they're the future." 4/5
*****
^ Joke btw, I wouldn't really do that.
 
Last edited:
just catching up on this thread!!!!!!!.

i got caught out..........

i speed read the thread and went for some...caught out there, but it was not for plumbing purposes i need some square tube for my landy seat base legs project so they dont rust like the others.

it was not for plumbing interest, honest!! ask ray.

whats worse is i was asking myself..shall i shant i. let some one else have it until ray said there was loads.lol

all the same, i still want some of the tube ray?;)

and fyi you can bend 15mm mild steel sq tube in your benders!!!!

good gag ray well donerse
 
LandRover_Sponsors_SQUBE.jpg
 
And me ! Im just reading this thread through again now ! I got caught it would actually be helpful ! I actually rang a lad that i do all the work for who basically stumps up the cash and he was like sounds good ! But how much are the clips ? And whats the price like for lagging ! I still havent had the heart to break it to him ! The next spec will be for hi tech square piping etc ! I was genuinly interested !
 
Spill it, I'll send you a photo of the boiler room from the local magistrates court if you do - because I know you're commercial.

Which magistrates ? Surly you have to share this p o r n with your fellow plumbers !
 
Hardly. Centralheatking was the source of the April Fool offer. I was just the front man.

*Facepalm* I realised that shortly after I posted that, I'll get my coat...
 
Most have now 'fessed up.

Sadly, I did :-( but was very drunk :)

its not the getting caught out that hurts just not getting free copper!!!!!!!!!!!!!

i fell for it!!!!

I must be the dumbest person out there, I thought it sounded great!

I had a skin full of Murphys but that's no excuse.

Nooo keep our names hidden!

i got caught out..........


Only 4 left.
 
And me ! Im just reading this thread through again now ! I got caught it would actually be helpful ! I actually rang a lad that i do all the work for who basically stumps up the cash and he was like sounds good ! But how much are the clips ? And whats the price like for lagging ! I still havent had the heart to break it to him ! The next spec will be for hi tech square piping etc ! I was genuinly interested !

This one actually had me in tears! Double Whammy!
 
Last edited by a moderator:
Gasman would be my bet! And one of the simons? And tbservices!

Nope. One of the others was Mutley Racers, and in fairness he owned up as soon as he got the "Gotcha!" PM from me, but he deleted his own post because the gag was still running at the time.

My favourite was the one that came in hours after the hoax was admitted - an object lesson in reading threads to the end before replying!
 
Nope. One of the others was Mutley Racers, and in fairness he owned up as soon as he got the "Gotcha!" PM from me, but he deleted his own post because the gag was still running at the time.

My favourite was the one that came in hours after the hoax was admitted - an object lesson in reading threads to the end before replying!

So, just to be clear, I won't be getting square tubing for free? :bigcry:
 
Status
Not open for further replies.

Reply to Freebie Alert: SQUBE copper tube and fittings in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock