- Messages
- 2,718
I've come across this at a job before and now have it in my new flat.
A double panel rad, one panel with the bleed valve is piping hot, the other panel at the bottom is hot and only warm at the top.
Bled it and no air inside.
The bleed valve is integrated into the mould so there is only a nipple.
How can I bleed it properly as the issue must be air??
A double panel rad, one panel with the bleed valve is piping hot, the other panel at the bottom is hot and only warm at the top.
Bled it and no air inside.
The bleed valve is integrated into the mould so there is only a nipple.
How can I bleed it properly as the issue must be air??