Currently reading:
Brilliant filling loop valves

Discuss Brilliant filling loop valves in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
Never had them pass before. Are you sure it is the valves and not just the levers not switching them off properly?
 
I have had the same problem, customer topping up after work from decoration, junk gets behind the valve when topping up and hay presto. You could get away with one but likely you will need both.
 
Definitely passing as when I disconnect the hose I got water coming from cold side and return side. Expensive they are
 
the knobs round off on these and only need need allen key to isolate iso valves
 
Status
Not open for further replies.

Reply to Brilliant filling loop valves in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock