flame

  1. C

    nuway boxer burner no flame

    Hi guys My nuway boxer burner started up and burnt for about 20 minutes and then only the blower is now working. 1. system has just started after a new refill of oil 2. system has been off for several weeks 3 was service prior to lying off period. any thoughts suggestions welcomed.:innocent:
  2. D

    vokera mynute

    hey guys had a problem with a mynute 28, min 1.6mbar max 10mbar, however on max had ratio of .0051 co 545ppm, fresh air point was perfect and 2 wings on either side of combustion hood were in place... the only way i could lower the readings was to reduce max gas pressure?? on min readings were...
  3. M

    Baxi instant 105 he (problems) help!

    I have the above boiler 4 years old and am looking for any advice as really hope i dont need to get a engineer out as might be very costly. The problem (problems) are - the warm water wont work at all when i put the taps on the (tap) symbol flashes but the flame light doesent ( so i assume the...
  4. M

    baxi 105e flame drops

    any one seen this before? after about 5 minutes the flame drops and water runs slightly warm. theres a tube from the flame compartment to the gas valve. if i squeeze it the flame goes up. ive changed the thermostats, air pressure switch and the heat exchanger (used ones but from a working...
  5. S

    Ravenheat 84ET fan problem?

    So I've been trying to fix this boiler for too long. It's so far out smarted me. When I turned up it the spanner LED was illuminated. So I linked out the overheat stat and the fan came on, but it wouldn't ignite. If I blew down the APS tube the burner would light, as soon as I stopped it went...
  6. B

    vaillant turbomax vuw 282e

    hi been to this boiler today and when in hw the htg flow pipe gets hot and the rads so the diverter is passing - also when hw tap is opened the boiler does not always fire(fired every time while i was there so not sure if diaphragm- sw worked when moved with screwdriver and boiler fired). how...
  7. C

    glowworm economy plus 40ff

    just got in from looking at a glowworm economy plus 40ff and its a no go,, spark from spark generator, pilot lights then just keeps clicking but no main burner ignition so im pritty certain its the gas valve?? unless some one else has any other ideas well i was just wondering if gas valves...
  8. L

    Intermittent flame failure potterton proforma 24 boiler

    Hi wonder if anyone can help I have a 2 year old pott proforma 24 boiler. and am getting an intermittent flame failure fault recently. It may come back on after reseting it but sometimes it takes a good few times. Any ideas what the fault is? Cheers Lins
    • lindsey27
    • Thread
    • boiler failure fault flame getting intermittent oil potterton valve
    • Replies: 1
    • Forum: Plumbing Jobs | The Job-board
  9. M

    Boiler keeps cutting out - flame lift

    Hi We have an ARISTON boiler (about 4 years old I guess). The last few weeks it keeps cutting out randomly and stops producing hot water. The screen displays 'error 504' which according to the manual means 'flame lift'. Does anyone know what this means and will it be expensive to fix? If I...
  10. M

    Combi CH and DHW on and off and on and........

    Hi All, i wonder if you can help, i hope you can. I have a problem where my Ravenheat 820/20 combi boiler will not keep the burners on for a prolonged time. The burners fire up then shut down, then they will fire up again then shut down, and so on. This alternates about every 30 seconds. It...
  11. W

    Intermittent flame failure on my Potterton Performa Eco 24 boiler

    Hi: I have been having a problem with my Potterton Performa Eco 24 boiler (five years old) for over a month now. An engineer has looked at it twice but cannot find the fault. Basically the problem is that I keep having a flame failure fault when I try to use the hot water and the central...
  12. R

    ideal isar24he

    Hi everyone, I was called out to an ideal isar 24he boiler which has the fault codes L,F displayed. The boiler is firing up but then shutting straight down I have checked the condensate as I know this is a common problem but that seems all clear. I supspect it is the diverter valve but just...
  13. D

    Pilot flame

    Hi all. My gas boiler is pretty ancient, has been very reliable over the years, but now it has a problem It's a fairly minor problem, the pilot flame wont light using the push button ignitor. It lights ok with a taper & stays lit but the spark from the ignitor just wont light it. The spark is...
  14. B

    how to adjust gas hob flame?

    hi all, a customer said that the gas hob flame was too weak, is there anyway to increase the operating pressure? never did this before, is this possible? cheers in advance
  15. D

    Main 24he flame failure light perminatly on

    Hi, ive got a main 24 he combi , 2 days ago i noticed i wasnt getting hot water, when i checked boiler, the flame failure light was on, not flashing but on perminatly, even when i wasnt calling for hot water or heating light was on, when trying for hot water or heating,the pump is spinning also...
  16. A

    Bowtorch

    Hi,I am after a new blow torch but when I look online I can't seem to find any which I have heard of! I am just wondering what you lot think are good and where I can find one online?
  17. S

    Britony Combi SE80 no flame

    Hi I have a Britony combi SE80 that is displaying no flame (the two end lights) the fault finding guide indicates to replace the pcb this is not a problem but before I go ahead is there anything else that could cause this problem and be rectified without this procedure any assistance would be...
  18. D

    Heatline Compact S24, intermitent fault, error code 90/ flame or gas failure

    Hi, I've been called out to a Heatline Compact S24, which was not giving hot water or heating, and error code 90/ flame or gas failure fault light flashing. Cleaned & serviced it, checked connections etc & boiler fired up. Both heating & hot water working OK independantly of each other for a...
  19. Q

    Baxi 105e Flame Failure Problem

    Hi Guys/Gals, I am having an intermittent flame failureproblem with my boiler. Problem is apparent on both heating and domestic separately so appears to be the ignitionsequence (bit of my background, time served plumber but although I’ve been outof the trade for near 20yrs I’ve kept my hand in...
  20. S

    Baxi boiler - flame goes out and re-ignitesl

    I have a Baxi 105e combi boiler. It has recently started to shut the flame off when the hot water/heating is on, then about 10 sec's later it re-ignites. I have changed the water and heating thermostats, but still doing it. My next option wuld be to change the control board, but at £100 I was...

Newest Plumbing Threads

Back
Top