My renewal is over £500 for £2,000,000 cover. Domestic plumbing, heating and gas. Nothing unusual or nitch. Never made a claim, excess £1000. 20yrs with same insurer does this sound about right? How much should i be paying, current quoter originally recommended by institute of plumbing. Cheers.
I need to choose a reliable budjet boiler. Ive never installed a veissman before and its been years since i installed a baxi.
I like the specs on both boilers. The amount of plastic and rubber worries me about the veissman but i do still like it, the baxi 624
looks like a lot of boiler for the...
My anton evo2 now needs a £250 service with new oxygen and carbon monoxide sensors. My first thought was maybe I should just replace it.
Do the service bills get bigger than this?
Im replacing an old ferolli sigma 40 60 on an open vented system.
I ve narrowed the choice down to either
Baxi 418 18kw or Ideal Logic +heat 18kw
They are similarly priced and featured but i dont know either boiler.
What are the customer support like for Baxi vs Ideal and more to the point is...
The dilema for this installation was replacing an 8.5kw shower which may have been overated for the 6mm cable. I would'nt do it because someone 10yrs earlier thought it ok, if it caused a fire that would be a poor defence. I ran the details through TLCs cable calculator and it recommended 10mm...
My understanding is if the 6mm cable is fitted where heat cant build up then 8.5kw is ok. Any insulation then it has to be 10mm. Part of the run goes through the roof so its bound to be covered in insulation.
Hi all, Manufacturers always cover themselves by saying get an electrical engineers advice. Fair enough.
I understand a cable can overheat but i cant remember last time i fitted 7.5 kw for shower. Is there a simple calculation that would cover me for installing 8.5kw on 6mm. Length of run...
Ive got an electric shower to replace, currenty 8.5 kw on a 6mm cable.
Is it dumb to install 8.5kw on 6mm, im sure i used to do this years ago without thinking too hard about it.
A quick bit of research recommends 7.5kw max rating. what would you do?
Rewire for 10mm too expensive. Cheers.
Its not blowing any pcb board fuses and the 3 amp in the fuse spur that powers the wiring for the boiler and programmer is fine. The main electric fuse box for the house is what is tripping. Just the circuit that feeds this part of the house.
The problem is obviously linked to the fan boiler...
Im trying to fix a Ferroli sigma 40 60 heat only boiler. As soon as its powered on the main board trips. instantly. I disconnected the fan and it stops tripping, so im thinking simple enough change the fan unit. Measured the ohms and it reads 75 which sound about right. connected the fan to a...
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.