Currently reading:
Vaillant g10 seals and servicing

Discuss Vaillant g10 seals and servicing in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Scott_D

Esteemed
Plumber
Gas Engineer
Subscribed
Messages
6,129
0C4E160D-499D-4A9F-9ECC-95D7AC374145.png
thought I would continue this here instead of the other thread

When I went in the Ecotec training day a few years ago I was told to open the heat exchanger up every 5 years unless FGA reading say otherwise

Every time you open the heat exchanger you should replace the seal

Am I wrong? Or has it changed?
 
And...... you also made a discreet violent comment towards myself ! Which I’m sure I interpreted correctly.

Just remember, you don’t know what’s on the tuther end of the touchpad, when making threats.;)
 
Just remember, you don’t know what’s on the tuther end of the touchpad, when making threats.

now now no need for that either was it
 
Junior mk2 ?
 
Common stock in most places city plumbing if there still open have them
 
:D
 
Yes mate sent it in the post. But now the heat ex is brand new the CO reading is blooming high.

Oil in the manufacturering normally go back in a week to do the readings / paperwork
 

Reply to Vaillant g10 seals and servicing in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Back
Top