Hi all,
Wish I had X-ray vision.
My customer has an old concealed shower valve, with a concealed shower hose connection.
There is a dribble from the plastic housing around the shower hose connection (it's not the rubber sealing washer/etc on the hose). So maybe a crossed thread on the hose connection, or hairline crack in the plastic housing underneath the shroud, etc. Whatever, it's old and unsightly, and he'd like it upgraded.
Can I assume there would be a 15mm pipe popping out through the wall inside that housing, and that I might be able to fit something like this on it:
Once I start dismantling it, I'd be rather committed to seeing it through (preferably without ripping tiles off, if possible).
Thanks again for all your advice,
Jennie
Wish I had X-ray vision.
My customer has an old concealed shower valve, with a concealed shower hose connection.
There is a dribble from the plastic housing around the shower hose connection (it's not the rubber sealing washer/etc on the hose). So maybe a crossed thread on the hose connection, or hairline crack in the plastic housing underneath the shroud, etc. Whatever, it's old and unsightly, and he'd like it upgraded.
Can I assume there would be a 15mm pipe popping out through the wall inside that housing, and that I might be able to fit something like this on it:
https://www.NoLinkingToThis/p/aqual...IgCXAG0BaGD_lX56AThMLeGK77xkwCgIaApGgEALw_wcB
Once I start dismantling it, I'd be rather committed to seeing it through (preferably without ripping tiles off, if possible).
Thanks again for all your advice,
Jennie