sludge

Sludge is a semi-solid slurry that can be produced from a range of industrial processes, from water treatment, wastewater treatment or on-site sanitation systems. For example, it can be produced as a settled suspension obtained from conventional drinking water treatment, as sewage sludge from wastewater treatment processes: 23–25  or as fecal sludge from pit latrines and septic tanks. The term is also sometimes used as a generic term for solids separated from suspension in a liquid; this 'soupy' material usually contains significant quantities of 'interstitial' water (between the solid particles). Sludge can consist of a variety of particles, such as animal manure.Industrial wastewater treatment plants produce solids that are also referred to as sludge. This can be generated from biological or physical-chemical processes.
In the activated sludge process for wastewater treatment, the terms "waste activated sludge" and "return activated sludge" are used.
In food processing and beverage-making industries, sludge can have high protein content and other nutrients that can be used for beneficial purposes such as animal feed, thereby avoiding disposal at a landfill.

View More On Wikipedia.org
  1. L

    water in f&e tank heating up

    I recently done a job in a bungalow of taking some rads off to let the lady paint behind them,and returned to put them back on. The woman said that she always had one cold rad while the rest were hot. I tried to bleed it but no air came out only water,so i turned all the others off to force heat...
  2. D

    faulty boiler

    Hi, I have a heatline viso 24 ( i know what your thinking but im determined to make it work!!) The problem im having is it keeps triggering the thermostat light which stops it working. I have tried replacing it but nothing and im reluctant to change the pcb unless i really have to. One thing i...
  3. I

    Difficult customers

    I was asked to add 4 new rads to a vented heating system (3 years old) I have added 2 and got them running. Two days later on my return visit The customer tells me that the 2 new rads are cold. I did all the tests and checks and reached the conclusion that the problem was sludge. The customer is...
  4. P

    Combi System Flushing - through filling loop.

    Hello all - more on the saga of my new old home and my Combi System CH!! Having repaired the boiler I am now looking at flushing the system and adding fresh inhibitor. The water that comes out of the radiators is virtually clear - but I have seen posts that say it should be black in the presence...
  5. S

    flushing an old system

    Hi all, Any advice on best way to flush a y plan system without using a powerflush? Also concerning a blocked cold feed, where is the neutral point? Where the cold feed comes off the f+e tank and then joins the flow pipe in airing cupboard? Is the cold feed normally 15mm pipe? Wouldnt it fill...
  6. S

    Flue mess

    Please help I have a floor mounted ideal boiler , flue liner goes up through a flue out via a hood /cowl , for the past 3 months this wet oily sludge has been working its way down the flue collecting in the bottom and when the heat from the flue warms it up it seeps down the inside and outside...
  7. T

    heat exchanger

    hi all, we have a puma 100 combi boiler, central heating works great but hot water is only warm then it goes cold. British Gas said we needed a filter at a cost of £250 which they fitted and also that we needed a heat exchanger which they tried to order but they have said they are now obsolete...
  8. W

    Balancing a Single Pipe System

    Hi. Have been asked to look at a single pipe system which is out of balance. Don't have much esperience in them. The first two radiators on the circuit are hot as are two upstairs. The rest are cold or lukewarm. What is the best method of balancing such a system? Should the pump be on a...
  9. cr0ft

    Air Lock/Blocked Cold Feed Boiling Issues - HELP!

    Hi all, Advice appreciated. I drained down a 13 rad open vented heating system today to replace all the TRVs on the ground floor. Obvious signs of corrosion in the system (header tank full of brown water). Changed TRVs, on trying to fill the system realised that no water was coming in from...
  10. P

    Worcester Cbi 14/19

    Got a problem with above boiler. Customer reports she gets about 45 minutes use befoe it goes to lock out. Shows flame failure fault. Once it is reset works for another 40-45 mins befoe it happens again. Any ideas? I cant actually find anything immediately wrong with it.
  11. B

    which powerflusher?

    can somebody recommend an effective power flushing macine?and are they as good as doing a manual flush?cost would be a help as well i am reluctant to buy one but its hard work removing rads on a manual flush
  12. M

    constant airing of radiators

    i live in a bungalow with a open vented heating system, the problem is I am having trouble with air in the upstairs radiators, they need constant bleeding. I have the radiators filled upstairs and they are working brillant, but when the heating is off again they then seem to fill with a air...
  13. S

    Magnaclean positioning

    I have bought a magnaclean twintech. Do I fit it in the return? Cheers.
  14. H

    No Water from the Boiler poblem

    Hi, I hope someone can help out with this one... I have an Ideal Mexico Super 2 boiler which is on a straight forward open system with header tank. The system only does heating the hot water is on a totaly seperate system. I've had a problem over the last month were the heating would...
  15. S

    Heating system flushing advice please

    Whilst replacing a radiator recently, I noticed that the water is black & horrible. I have a couple more to replace shortly. I would like to flush my heating system before adding an inhibitor. Which are the best products to use, Fernox or Sentinel? Thanks in advance.
  16. H

    My rads are not working properly

    HELLO, MY RADIATOR IN THE FRONT ROOM ONLY STAYS WARM BUT ALL THE OTHERS ARE HOT ANY IDEAS WHY THIS IS .:confused:
  17. X

    Questions About Flushing

    I just cleaned out my DHW heat exchanger to fix a reduced flow problem in the hot water (all nice and hot-hot now). The amount of oxides (no sludge, just rust-like flakes and particles) which came out of the heat exchanger suggests to me that a good flush of my system would be recommended. Sound...
  18. P

    Rad Sludge?

    Hi all Got a mate who has one radiator that only heats up at the top but not the bottom. i dont usually do powerflushing or anything like that. each radiator has its own draincock so if i kep emptying it and back filling it with the garden hose would that sort it out? Also is there a way of...
  19. M

    worcester bosch greenstar 24i problems

    Help please !!! Had a greenstar junior 24i installed 16 months ago. Virtually since it was first installed this boiler has suffered loss of pressure. The pump valve has been replaced twice as the boiler was leaking internally and the expansion vessel has been replaced as it wasn't working. I...
  20. R

    advice on getting a new boiler

    Hi our boiler has recently packed up its over 15 years old(we only mvoed in october) so we need to get a new one. I just dont want to get ripped off firstly,how do i find out what i really need for our house? Its a 2 bed semi Thanks
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock