Search the forum,

compensator

A motion compensator is a device that decreases the undesirable effects of the relative motion between two connected objects. Motion compensators are usually placed between a floating object and a more stationary object, such as a vessel or a structure fixed to the seabed. The motion compensator does not prevent the motion, but tries to eliminate the negative effects of the movement. These negative effects include (1) the changes in force and stresses, and (2) the hysteresis, i.e., the rapid start-and-stop "jerking" of the objects.
A heave compensator is a kind of motion compensator. Whereas most motion compensators will compensate for movement in all directions, the heave compensator will compensate for movement in only one direction, for instance, for vertical movement. In practice, the words motion compensator and heave compensator are used interchangeably. Sensor technologies being used are inertial sensors and GNSS (example: iMAR Navigation) or image processing.
The simplest motion compensator is the anchor chain of a ship. Not only does the anchor prevent the ship from drifting, but the chain itself dampens the movement of the ship due to undulating motion of the waves. Generally, motion compensators are implemented as springs. For very large forces (dozens to hundreds of tonnes), the springs are implemented as gas springs: hydropneumatic devices — a plunger cylinder buffered by a volume of gas.
Examples of heave compensators include:

Drill string compensators
Riser tensioners
Conductor tensioners
Guideline tensionersMore advanced heave compensated systems are often specified as systems with Passive Heave Compensation or Active Heave Compensation or combinations of these. A new approach to advanced heave compensation systems is offered by Balanced Heave Compensation, increasing safety while lowering energy consumption and spring adjustment times.

View More On Wikipedia.org
  1. J

    Weather compensator for Firebird Oil Boiler?

    I have a space heat only 26kw output Firebird Condensing oil boiler. I only use it for my homes space heating nothing else. Well insulated 80s renovated home. You can see there the boiler temperature stat is the simple white box. I recall about 10 years ago there used to be generic weather...
  2. david stanton

    weather compensator with comfort II stat

    Hi does anyone know if you can fit a worcs weather compensator and it work with the comfort II thermostat, is it just a matter of sighting the weather compensator out side and fitting the wire/ plug to the board and then it "does its thing"?
  3. J

    Weather Compensator - Greenstar CDi condensing boiler

    Hi, I have a Worcester 30 CDi boiler running on natural gas and would like to know if a weather compensator can be retro-fitted to the boiler. I have contacted Worcester Bosch and the technical guys there say that they do not have anything that will be able to assist in this problem and would...
  4. Jock Spanners

    Baxi 630 with weather compensator

    Evening all, I tried Baxi technical today but the guy I spoke to wasn't able to help me. I've just fitted a 630 and decided to fit a Multifit weather compensator (for the first time) in line with the new Part L regs. I chose the standard one - not the flue mounted model. When I tried to set it...
  5. D

    Heating with a Weather Compensator

    I have a Baxi platinum combi 33HE with a weather compensator fitted and don't fully understand the using of it. I understand the way in which it works but not sure on which 'Curve' to set it on via the Central Heating Control knob. The numbers on the curve: 10, 15, 20, 25, 30, do they represent...
  6. C

    Weather compensator with Nest

    Hi, I've recently had a new Worcester 29cdi classic combi installed with a Nest thermostat and would like to know if a weather compensator can be compatible with the Nest.
  7. kozak1968

    Vaillant weather compensator

    Got some newbuilds to spec. They require weather compensators to be fitted. There is an underfloor zone a radiator zone and hot water . The U/F zone comes with programmable roomstat, the rad zone will have a Honeywell CM907 prog roomstat and hot water will have a Honeywell ST9001. The boiler...
  8. P

    Grant GEO360 weather compensator

    Anyone fitted one of these? Did they find them easy to setup/ use and are they worth the money?
  9. M

    Central heating not heating house to desired temperature - Weather Compensator

    I had a new Vaillant Boiler (ecoTEC plus 831) and Weather Compensator (VRC 470f) fitted a while back but during the recent cold weather have noticed the house isn't reaching temperature. I have the desired temperate set at 21oC but on cold days it can take hours for the house to reach this...
  10. G

    Viessmann weather compensator

    Hi all am i rite in saying that if I fit a viessmann vitodens 35 kw system boiler with a unvented hot water cylinder and with a weather compensator then the hot water side will take ages to get hot as the temputure in the flow will only be about 40 degrees. So if I fit the 4 pipe system can that...
  11. S

    Weather sensor (compensator) cable

    I have a Honeywell TA1 temperature sensor which came without any cable. Can anyone confirm diameter (probably 0.25mm2) and maximum length? The boiler and the gas mains is on the south side of the building..
  12. A

    Vaillant Ecotec System, MegaFlo 250L, Vaillant VRC 470f Wireless Weather Compensator

    Hi All, I hope someone can help me, I am not a plumber, but a home owner, the process of trying to get accurate advice seems tricky, and both Vaillant and Heatrae Sandia seem to have no helpline after 4pm on a saturday. Background: We are nearing the end of a building project which has also...
  13. P

    Vaillant VRC 430 Weather Compensator

    Hi I have just installed the vcr430 Digital Weather Compensator and vr65 control centre everything seem ok apart from when the vcr430 is calling for heating the display on the boiler show the tap and the rad on and the 3 port valve goes into mid position even though the tank is up to...
  14. D

    Balancing a new system & other questions

    Just had a new complete system installed and now have a few questions and observations. Baxi duo-tec 28 HE A, 2 bed maisonette with 6 rads / 5 TRV's. CM 927 programmer. The installation was a nightmare for both me and the installers. Asbestos suspected in the ceilings, gas supply...
  15. N

    nursery school backup boiler?- advice needed

    Hi all, Ive just had the usual problem where our great 'old school' plumber is expected to have a BSC in electronics engineering. The problem is we have four 45KW boilers and a lot of radiators in a charitable kids nursery (the hot water is a separate system altogether!) They're all knackered...
  16. C

    ATMOS boiler problem

    Hi everyone, I have recently got the following message from one of my customer. If anyone has any idea, please share with me. Thank you all in advance. "Our ATMOS boiler has gone wrong. It used to stop every couple of weeks and we never found a plumber who could fix it. It was fine as...
  17. P

    Anyone fitted Valliant with 430 weather compensator

    Got a customer who wants one fitted and havent done one before. Had a quick look on the net and looks fairly simple all bar one thing. Am I correct in thinking that the control panel which plugs on the front of the boiler has the room stat built into it? If this is the case what good is that...
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock