Advice on vertical flue

Post new thread

Discuss Advice on vertical flue in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
M

mutley racers

Esteemed
Plumber
Gas Engineer
Subscribed
Messages
5,171
Morning guys. I have not done many vertical flue installs and am wondering what's the best way to run this flue to get the correct distance from the chimney pots. So it looks like I need to be 1200mm away from them. Is this even with the flue's not in use? Or is there a cap I can put on these If they are not in use.

Screenshot_2017-03-06-07-54-35.jpgScreenshot_2017-03-06-07-53-51.jpgScreenshot_2017-03-06-07-53-46.jpg20170303_175506.jpg

Unfortunately there is no where else for the boiler to go.
 
You changing the boiler muts ?
 
Can't you go straight out through the boxing ? With a plume kit of course
 
I believe the boxing is actually the chimney breast which the conversion has been built around?
 
Maybe you are correct. I could use a couple of elbows and go around the chimney and out by the window and then use a plume kit with extension to run along the soffit and terminate. No need for a roofer then either
 
Made a right cock up today. Thought my acs expired on 9 may and just checked documents and it is the 9th of march. Eek!!! What a numb skull. Can I still do gas work on the 9th of March? The final day
 
Yes you have till the end of the day
 
Another question, how London do you have once your gas safe registration has expired to re register before being classed as a new guy? Cannot seem to find it on the site
 
mutley racers said:
Another question, how London do you have once your gas safe registration has expired to re register before being classed as a new guy? Cannot seem to find it on the site
Click to expand...

You would have to speak to them on that (gas safe) but I think it's less than 6 months
 
Thanks Shaun. I was hoping it was longer than a month as I don't want to have to pay full wack again
 
mutley racers said:
Thanks Shaun. I was hoping it was longer than a month as I don't want to have to pay full wack again
Click to expand...

speak to them i would and get it in an email :)
 
Is it possible to use a mcapline boss connector on the boss section of this tee if I remove what is left of boss connector? I really don't want to have to break all the boxing out and put a new tee piece in to be honest 20170307_114258.jpg
 
No shame someone cut the boss off
 
So you don't think I could file old parts off to tee and then cut this Screenshot_2017-03-08-06-26-37.jpgin but 10mm over to the left a bit
 
New posts
Status
Not open for further replies.

Reply to Advice on vertical flue in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

S
Mixing Vertical and Horizontal Combi Flue
Replies
9
Views
1K
SteveW_1955
S
M
Vertical flue/ roofing query??
Replies
5
Views
688
Timmy D
T
S
Flue position - will this be a problem?
Replies
2
Views
506
Snuggles
S
D
Wall mounted toilet problem with offset soil pipe.
Replies
4
Views
543
DaveTaylor1174
D
P
  • Question
Could the BAXI commercial boiler parts/flue melt ?
Replies
2
Views
212
oz-plumber
O

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock