I have already called worcester, they were unfortunately only able to go along with my theory of bypass fault. They had no more suggestions. I am facing a rather high flow rate also so I may have the plate back off and fit a new flow regulator, just in case.
Fitted new plate, still same problem only notice must be via the bypass(bypass pipe hot) the heating flow pipe gets rather hot. I have tightened the bypass screw but no such luck. Any suggestions would be a great as feel like im bangin my head against brick wall.
Fitted new plate, still same problem only notice must be via the bypass(bypass pipe hot) the heating flow pipe gets rather hot. I have tightened the bypass screw but no such luck. Any suggestions would be a great as feel like im bangin my head against brick wall.
I Did have a look a bit of black on the inside of the heating connections and I ran some water through the heating side, seemed to be flowing through ok although some small particles came out the first time. central heating works a treat, gets to all the rads quite quickly. That's whats got me...
I Did have a look a bit of black on the inside of the heating connections and I ran some water through the heating side, seemed to be flowing through ok although some small particles came out the first time. central heating works a treat, gets to all the rads quite quickly. That's whats got me...
Hi Guys,
I wonder if anyone can shed some light a fault I have on an old 24 Cdi BF.
I first of all had hot water call dropping in and out and the primaries getting hot on the heating side, Changed diverter, now no hot water call drop out or primaries getting hot on heating side.
However with...
Hi Guys,
I have had a couple of people with the ignition fault codes showing up on Vaillant system and open-vent boilers one was repaired under warranty but the other is on the older ecotec open-vent boiler.
My question is what do i need to look for if the ignition probes & leads are fine...
Ok, so I did a little more testing found out that there's continuity from the flame rectification probe to the PCB and opened up the pcb box carefully to show this electromagnetic microswitch on the board(see video below).
https://www.youtube.com/watch?v=chpsB10yHH8&feature=youtu.be
with this...
Hi Guys,
I have a bit of a problem with a thermocompact 242eh in that it sparks and ignites several times an then locks out. I have a feeling that the solenoid or gas valve is at fault. a video of the fault can be found below.
https://www.youtube.com/watch?v=1mMlu0zhVeM
Any help would be...
Hi Guys,
I thought I would be best off asking for this one in lieu of the wealth of advice on here.
I have a landlord with a halstead ace high combi, boiler fires and stay on all appearing to run fine, no noise, no over expansion. However when heating is switched on pump runs, fan runs...
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.