Recent content by hyeung288

  1. H

    Boiler Behaviour- Is this normal?

    Hmmm so suggests my symptoms noted is caused by something else then? Any ideas what else this could be? I’m sure it’s not the CH as the zone valves are turned off (no led light on actuators) and corresponding room stats are off. Is it an internal feature or protection triggered by the boiler...
  2. H

    Boiler Behaviour- Is this normal?

    I thought the mark on the pipe stat is an indication of the set temp on that stat ie below 0C? With regards to cover, I’m not sure that it can be prized off... Should this not normally be set to a higher temp?
  3. H

    Boiler Behaviour- Is this normal?

    Thanks for that, I now understand concept of frost and pipe stat protection! Need to ask, is my pipe stats setting sensible as per picture? However, I’m still unsure as to which stat you reckon is likely at fault? Is it mainly the pipe stat or the frost stat? Or both? Now, according to the...
  4. H

    Boiler Behaviour- Is this normal?

    Hi, Attached is a view of the setup in the garage with the pipe stat attached to the return pipe. I noticed that the pipe stat dial is set below the min value according to the dot. Assuming that just means it’s set at 0C? I’m not sure what the frost stat is at as it’s got tamper free cover over...
  5. H

    Boiler Behaviour- Is this normal?

    Hi, Looking for some advice on our boiler system. Our have a Potterton Promax SL boiler combined with an unvented santon premium plus hot water system. I have a dual zone system so separate thermostats for up and down stairs and a separate hot water controller/scheduler. The system is working...

Newest Plumbing Threads

Back
Top