Currently reading:
Log burning stove

Discuss Log burning stove in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.

southcoastboile

Plumbers Arms member
Plumber
Gas Engineer
Messages
1,279
Does anyone know if you can get a log burning stove that has a vertical flue that doesn't require it to go through a chimney?
ie just a free standing appliance with the flue straight off the top. i assume you would have to have some sort of surround around the flue to stop anyone touching it?
i had a quick look on the meta and it looks like they must pass through a chimney?
 
Does anyone know if you can get a log burning stove that has a vertical flue that doesn't require it to go through a chimney?
ie just a free standing appliance with the flue straight off the top. i assume you would have to have some sort of surround around the flue to stop anyone touching it?
i had a quick look on the meta and it looks like they must pass through a chimney?

yes you can and you would use twin wall flue
 
Only needs twin wall where it passes through ceiling and beyond. Single skin pipe will radiate heat back into room and look neater. Ensure wall thickness suitable for stove. Thin walled gas flue not acceptable.
 
Only needs twin wall where it passes through ceiling and beyond. Single skin pipe will radiate heat back into room and look neater. Ensure wall thickness suitable for stove. Thin walled gas flue not acceptable.

what happens if small children are about (dont do wood burning stoves/heater)
 
Thanks for the replies. I take it that they normally come with the correct flue Anyway regarding thickness of flue wall?
 
The other thing I was thinking, how to the joints normally seal as it seems a bit risky having just a single walled flue with no safety device should a joint fail?
 
No, the flue is a generic part so you'll need to make sure it's the correct grade and suitable for the job. You know it'll need signing off through building control, the same as any other appliance yeah?
 
A log burner was installed around our way about 6 months ago. Flue was installed incorrectly. Rest of family was asleep in bed when husband noticed co alarm going off. Fire brigade spent the night ventilating the house.

Get a Hetas engineer to install.

Could have ended differently.
 
As above. Proper install needed. Danger is when people close down air to achieve overnight burn. Leaks on flue, that would normally draw in air, and incomplete combustion create a danger.
 
Should also add that in the absence of existing chimney the termination of flue above roof level needs special consideration, both for stability and to avoid downdraft.
 
Status
Not open for further replies.

Reply to Log burning stove in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Newest Plumbing Threads

Back
Top