Questions and plumbing advice in the Oil and Solid Fuel Forum - .
Some popular plumbing forums: Plumbing Advice - Plumbing Tools - Plumbing Courses & NVQ's
- Poll
Any concensus on heating oil additives?
Bought a couple bottles of this stuff on amazon it...
What is the significance of the kg/hr stamped on danfoss nozzles, I have a 0.6 usgpm nozzle...
Hi guys, will be grateful for your advice. Riello rdb1 in Grant combi. When boiler has been...
Hello, this is my first time on the forum. Three months ago we had a 1000 lt fill. We then...
Hi all I have to site a condensing oil boiler close to a boundary. Its going to be one of these...
Hi
I have a worcester heatslave external oil boiler which makes a large bang every time we use...
I have here a Trianco TRO 15/19 boiler and on inspection it has no baffle plates, just the...
Hi all I have a Stanley superstar 60k oil and last year it developed an issue with the...
i have installed a firebird burner with the new ELCO burner the burner is factory set with a...
I am told that a Toby 4cc-13cc oil control valve can be used to replace my Rayburn’s faulty...
My grant 70 mk 2 heating pressure is constantly increasing in pressure. I have changed the heat...
God how I hate this thing! So the problem with this thing aside from it being filthy and...
We have a 9 yr old Heatslave 18/25 that's been regularly serviced. Heating was on in the morning...
Hi, I'm new to this forum so I hope I've posted this in the right place. I installed a Grundfos...
Hi all, new owner here looking for advice ...
There is a Grant Euroflame 70/90 oil-fired boiler...
The boiler has just been serviced and lots of new parts fitted, On firing up all works fine for...
Hello all.
I'm looking for advice to help my heating engineer fix my problem! He actually...
Can I get a backboiler connected to an indirect vented hot water cylinder through the existing...
Hi, wondering if anyone can help. I have a leak coming from my oil boiler only when the boiler...
Very strong varnish/gloss smell from behind oil fired boiler.
Was strong kerosene smell for a...
Hi. Asking for a relative whose neighbour seemingly DIYed an oil tank replacement. She was aware...
Hi. Having recently qualified in oil(yet to do any oil in the real world), I was wondering where...
The use of inserts on 10mm rolls of plastic covered copper. Brass inserts are available for this...
Hey everyone,
Does anyone know of an app with the oftec certificates on so they can be done...
I fitted this boiler some 18 years ago it's now time for a upgrade and the client has asked me...
Looking to renew my certs. Noticed there is now an OFTEC training place in Aberdeen near me...
My apologies as this question has probably been asked loads of times.
We moved into a new house...
Builder at my house went through oil line has been repaired and oil purged back to boiler. Now...
Hi everyone, i was wondering if anyone could help me with the name (if they have one) of the...
Hi I had a boiler fitted about 18 months ago and have found out that it was never registered and...
Hi,
Firstly, I am neither plumber nor heating engineer, just a willing diy, have a go guy.
I...
My Danesmoor is on last legs. Actually was when I posted on here two years ago asking about...
At a warmflow bluebird today not firing.I checked there was 240v going into the rdb control...
My boiler began to lock out occasionally every now and then.
Got it serviced
continued to lock...
I have been using a Stanley stove with a back boiler for the past ten years. We are now...
Anyone got any suggestion on how, if possible you could clear soot from the condensing heat...
With regs requesting more oil line pressure testing, what's the best way to test an existing oil...
Hi all.
Okay.
Long storey but, I'll try & keep it as short as possible.
We are buying a house...
Looking to replace our RIELLO 40 FS10 (3758435) Gas burner - 0.13kW, FAM.OIK.2 =12 -100mbar...
Hy all,
Do oftec regs allow passing of the oil feed through the foundation wall under floor...
Hello, ive been to a greenstar worcester bosch combi , with intermittent lock out , I've traced...
Happy New Year all!
New Year new problems.....
I have a new Titan oil tank to connect up...
Sorry for a long post but we have a complicated thermal store situation
Over the summer we had...
Had a call early today to a Grant 36e internal combi.
Fault was no heating but had hot water...
Does anyone know the
difference between the model B9a burner installed on the Worcester...
hi chaps, major headache this winter with so many tanks having water and contaminants in bottom...
Is there anyone out there who has come across this problem.
Our boiler locked out so pressed the...
Has anyone come across this before. Lead from the electrode on Firebird Combi. 2 years old...
Boiler is Worcester Heatslave external 18/25. We were notified of a pending power-cut for today...
Tags
Newest Plumbing Threads
-
-
Y Plan central heating gets hot on hot water demand
- Started by MPGASANDPLUMBING
- Replies: 0
-
Grant boiler rusting inside after 1 yr
- Started by RayPlumb
- Replies: 6
-
Instructions say to apply glass cement to rubber washer. Can I use silicone?
- Started by JM Tiling
- Replies: 2
-
How do I remove the copper pipe from the plastic connector?
- Started by JM Tiling
- Replies: 2
-
Pressure reducer/regulator for plastic water line?
- Started by carpetguardian
- Replies: 1
-
Cold water issues in the top bathroom
- Started by Apex84
- Replies: 3