- Messages
- 4,113
Change 2 pair of basin tap valves - used the tap splitter - works well, getting used to it. Also did valves on a bath.
Onto kitchen mixer, had big issue getting it off, the screw holding in on was s bugger to get to.
The box spanner was too short, no room whatsoever, took over 40 mins to figure it out, the box spanners can fit into each other to make a longer one!! Nice tip, fitted all ok, not a drip in sight.
Great afternoon & good earner too,
Changing that Bristan shower tomorrow, just a straight swap, old off, new on I hope.
Rct
Onto kitchen mixer, had big issue getting it off, the screw holding in on was s bugger to get to.
The box spanner was too short, no room whatsoever, took over 40 mins to figure it out, the box spanners can fit into each other to make a longer one!! Nice tip, fitted all ok, not a drip in sight.
Great afternoon & good earner too,
Changing that Bristan shower tomorrow, just a straight swap, old off, new on I hope.
Rct
