Grip It fixings useless?

[Bogart]

Decided to try these out to affix a radiator to a plasterboard wall. Is it me or are they crap. Use sounds easy but I cannot get on with them. Drill the hole fit the thing into the hole is fine. Now turn the centre with a screwdriver to open the wings. Two problems the screwdriver required is a flat bladed one of an odd size. I have searched my screwdrivers and cannot find one of the correct size either too small to operate the cam or too large to fit into the slots. Other problem is the cam setup is plastic and easily mangled, I managed that no problem! Will be returing to you know where.

 

[ShaunCorbs]

Never used them as I can't see how plasterboard will handle 60kw plus

 

[gmartine]

It's you, there's a bit of a knack. The blues (x4) are rated to supporting 100+ kg or over 25kg each. You need a large flat head to to open the "wings" but I prefer hollow wall anchors.

 

[Sharp Point]

Can’t see what’s wrong with the tried and tested expanding type, that’s used with the gun setting tool.

 

[Bogart]

Never used them as I can't see how plasterboard will handle 60kw plus

Biggest one says will support 113kg about which I do not disagree as they talk of sheer loading ie a wall is different to if one wanted to affix the rad to a ceiling, now there is an idea would free up wall space!

 

[Bogart]

It's you, there's a bit of a knack. The blues (x4) are rated to supporting 100+ kg or over 25kg each. You need a large flat head to to open the "wings" but I prefer hollow wall anchors.

I am not sure how they rate them as blue is supposed to be 113Kg which I assume is per fixing but again we are talking sheer loadings.

 

[Bogart]

Can’t see what’s wrong with the tried and tested expanding type, that’s used with the gun setting tool.

Agree fully with that is tried and tested and once you have got the gun is way cheaper.

 

[king of pipes]

Brolly fixings for me not found anything that comes close , kop

 

[Bogart]

My opinion now is that there are much better solutions out there. As they are relatively new I thought I would give them a try.

 

[Ric2013]

I got given some as a sample when they first came out. Tried them in my own house to fix WC cistern to plasterboard wall. They worked well. I used the little red ones that you just turn the metal cams out with a little screwdriver. No idea how the big blue ones with the central screw work. Too expensive to use professionally, and never really felt the need.