I need to adjust the large flush button because water continues to run after the cistern has filled up and the button does not return to its proper position, it stays depressed. The small flush button is working OK.
In which direction does the dual flush operating plate need to slide/be moved?
I have 4 Roca dual flush plates with mechanical 2 red wire valves behind them.
The only option seems to be to replace with their single option c£50. As all 4 have broken in exactly the same way as have most people who live on our estate I am loathed to keep buying them.
Does anyone have any...
Hi I have installed my concealed shower valve and fitted wall panels, I'm soon ready to put shower fittings through the panels and screw them into the wall plate elbows.
My question is what shall I use to seal the threads in the most effective way?
I have Loctite thread locker as the thread...
Hi
I've just had my annual maintenance check on my boiler (in title), it will be 8 years old in May this year and is (I think) still under guarantee as I get it checked annually with British Gas (they installed it and said the guarantee would be extended until it is 10yr old if I kept the annual...
Hello everyone.
I hope that someone can provide some guidance on something I can’t figure out how it is done
Essentially my plumber has put in my thermostatic shower before the tiles have gone up
So now I need to remove the mixer and the blanking plates to tile and then to refit them...
Hi all
New Diverter valve going in mid week ( subject to eng being available) and from my previous discussion, the dhw plate heat exchanger could also be causing the bypass to lift. So I have sourced a potential replacement dhw plate heat exchanger to go in at same time, but the original part...
My friend's bathroom is on a concrete slab. Near the shower there, for years, the wood has slowly rotted. Several folks replaced drywall, but didn't look much further. It's next to a shower. The shower's been retiled twice, and the shower pan has been replaced once. Everyone thinks it's coming...
Hi all,
I wonder if any can help?
I have a vitra dual flush plate model name is 'loop'.
All of a sudden the press buttons don't work (don't flush) They still spring back but don't appear to be pushing against anything.
Any help would be very much appreciated.
David
Having a chat with colleagues on this one to decide on best route.
Existing 500L megaflo which does not provide sufficiant HW.
Cold water entering cools the hot way too quickly and consequently the 500L is good for about half that.
Coil is 54kw boiler is 80kw
Cylinder options…
The...
Hi. I'm looking for a wiring wall mount plate/ back plate for the Honeywell T6(wired version).
Does anyone have one by any chance that is willing to give away or sell?
Don't really want to by a whole new system just for the backplate.
Thanks
Evening all,
Concealed valve install coming up. A fixed head and a handheld, both of which have 1/2” threads of different lengths.
How do I get the wall plates in exactly the right position behind the wall?
Thanks in advance
Hi all,
I'm due to change my first plate on a Worcester Greenstar next week (not looking forward to it).
I found this on Youtube. Is it really as easy as this guy says? And what about checking/replacing the O-rings?
Any tips most welcome.
Thanks
Jennie
Hi Guys (and Gals)....
Just moved into a new house, all fine, except today the main bathroom cistern started overflowing (into the pan).
I think its a Roca Duo, with the L1 plate (from the Roca website).
I've watched a couple of youtube vids on how to check these etc, but I've failed at the...
Could someone take a look at this for me please?
Just had a boiler put in our property on a grant scheme. The boiler is great other than him not cleaning the pipework including gas joints before leaving 🙁.
I've cleaned it up and it seems alright.
My other main worry though was what the follow...
I have a Roca Duplo frame and a PL1 flush plate both purchased from the same supplier and the flush plate was the recommended one. The PL1 flush plate is much to big however. My frame number is the ROCA WC L 890120010 3/6 Litre. I have looked at other Roca frames of the same type and they have a...
The boiler is a baxi combi
The pipe underneath on the left side of the plate exhanger where the DHW hot water comes out has green corrosion and signs water has dripped on the floor below it.
The plate exchanger was replaced a few months back so is nearly new. The pipe was not green before the...
Hi all.
Looking for an opinion; on the correct orientation of a plate heat exchanger. I had a discussion in passing about installing a plate heat exchanger on its back so that the connections are face up, standard orientation is that the platte exchanger sits on one end and the connections...
Hi all,
Firstly thanks for letting me join ...
I have loads of radiators with grill and side covers - 20 years old mostly. The plastic bit at the base of the side plates are now very brittle and always break when touched. - see picture. I'd like to get a load to replace the ones that are...
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.