ideal logic

  1. O

    Logic 24 - hot water only turns on radiators

    When I turn on water only on the logic 24 boiler the water heats up and so does the radiators. It’s a a single floor apartment with the boiler recently serviced and the safety valve and 12 litre vessel change. Using the hive heating system.
  2. BoilerNoob

    Ideal Logic Boiler on finance - worth it?

    Our current boiler is 19 years old (and a piece of Rubbish) Had a guy round today from Energy Options Solutions that offered us an Ideal 30kw Logic Boiler on 10 year finance with 10 year warranty. They claimed it would save us 54% minimum on our gas bill per month and we would have a magnetic...
  3. S

    How long does it take to Commission a new boiler

    The boiler is installed, it just needs commissioning, I suppose when there are no faults because if there are then it is the same as asking how long is a piece of string? The boiler is an Ideal Logic Max c35Kw, if that makes any difference. Cheers
  4. albert85

    System Boiler (Y-plan) with Google Nest 3rd Gen and OpenTherm?

    Hi I've got an Ideal Logic+ System Boiler (installed by my plumber as a Y-plan currently in the simple on/off mode) with Google Nest 3rd Gen. Is it possible to upgrade my system so that the Nest 3rd Gen controls the boiler via the OpenTherm protocol for both the heating and for the hot water...
  5. hyperbole

    Ideal Logic+ 35 Vs Vogue 40kw

    Another boiler suggestion post. 4 bed detached house built 20 years ago with cavity wall insulation and double glazing. 1 bathroom and separate ensuite shower. 2 adults and 1 child. Cold water flow is 20l/m. 16 radiators but 6 are single panel. Already have Tado which supports OpenTherm. Want...
  6. A

    Ideal Logic 35 Not Connecting to ESI RF Thermostat Receiver

    Hi all, we have an Ideal Logic Plus which was previously working with an RF mechanical clock/thermostat. Unfortunately the clock was dropped before Xmas so we decided to replace with something more modern. We got a salus and wired that up, nothing worked . We then got the gas engineer in who...
  7. A

    Ideal logic boiler phume

    I have an ideal logic combi code 33 which seems to be producing large phume compared to neighbours with same boiler. I had the boiler serviced recently and engineer said all is well and boiler is burning well. He did adjust the exhaust as the pipe was falling slightly away from boiler. He said...
  8. D

    URGENT My ideal logic Combi 35 boiler loosing pressure

    Hi I have a ideal logic 35 combi boiler is just little over 4 years old in a new build property was great for first few years but since about 2 years maybe it keeps loosing pressure what I top up. Once it lost it but then the filling loop wouldn't fill back up had someone out they said it may be...
  9. J

    Ideal Logic Combi 24. Water is perfect for bathing a baby but not for shaving.

    Good Evening from sunny Clevedon. Heat Exchange was changed 1 year and 13 days ago. I fitted a new no flow thermister, which I was told would be the main suspect but has made no difference. Any advice ? I have a big pan on the boil all the time for shaving and doing the washing up but I rather...
  10. M

    Ideal Logic L3

    Hi lads any of use ever come as an L3 on a logic? Nothing at all in the book about it just all pointed towards board when I was there, swapped it inc code plug, swapped thermistor whilst I was there and all that's done is I can now run just hot water for about 15 mins ... before it was heating...
  11. C

    Ideal logic plus and halo room stat, check serial number first

    morning as told by my local ideal rep if the boiler has a serial number earlier that AFQ meaning it was manufactured on June 2019 or before you will be unable to use/bind the new Halo combi stat
  12. R

    Ideal logic combi 24 no hot water

    Gas engineer here. Been to an ideal logic combo 24, (the older model with brass manifolds either side) customer complained about temperamental hot water. Did the usual checks solid red light on hall sensor diverter head ok diaphragm springs back return thermistor above pump ok thought it must be...
  13. R

    IDEAL LOGIC COMBI 30, hot water not very hot

    IDEAL LOGIC COMBI 30, hot water not very hot, water flow fine. Would I be right in that the diverter valve cartridge needs replacing. Any other suggestions
  14. fronty

    Ideal Logic combi cycling when CH hits 50

    Hi, my Mum's Ideal Logic combi keeps cycling when the temp reaches 50 degrees despite the CH control set to max. The manual says the flow temperature should reach 80 when set to max but I can actually hold the CH feed pipe with my hand and it never gets hot enough to cause me to let go before...
  15. J

    Ideal Logic Combi ESP1 30 SE code

    Hello I'm struggling to understand this code as I cant find it in the User Manual. The display has an SE code with a spanner in the top left corner. I am not able to change the water (40 degrees)or central heating temperature (30 degrees). Does anybody know what this could be? Thanks
  16. M

    Ideal Logic Problems

    Hello I have a Ideal Logic Plus Combi which is approx 2 1/2 years old. I am waiting for the Gas Engineer to come out but in the meantime would like to have some idea what might be up with my boiler. There are a 2 main issues and i don't know if they are related. Firstly the hot water only gets...
  17. D

    Pressure issues Ideal Logic Combi 30

    Hi, we have an ideal Logic combi 30 and have an issue with the system loosing pressure. We have had an engineer look at the system twice without being able to find a fault. I isolated the boiler last week to determine it was the boiler and not the rest of the system. When the system was warm...
  18. B

    Replaced radiator now boiler no CH but hot water

    I have had some damp proofing done and had to remove 2 radiators, and I have just had them re-fit. Heating was working up until the re-fit Now, the boiler is providing hot water, but when trying to run CH, will fire up then immediately go into pump overrun, cycle repeat every 6-8 minutes. One...
  19. king of pipes

    Ideal logic 24kw heat

    A routine vist to service this boiler a first time for me, turned into a bit of a nightmare as you can see below a small hole had appeared in the plastic flue part that takes the condense away made a right old mess in there i did a temporary repair job and serviced a full safety check it all...
  20. G

    Ideal Logic Heatmax Whistling

    Ideal Logic Heatmax H24 Whistling A near constant note when the boiler is fired. Appears to be from Venturi/Fan area. Any ideas on fix

Newest Plumbing Threads

Back
Top