I’m about to install a stone resin shower tray, the tray (RAK Feeling) comes with a warning not to use cement for setting on and instead recommends silicone or PU foam. A few questions;
Has anyone fitting this or a similar tray with PU foam? Or is best to use silicone? Which PU foam or silicone…
I’m setting the tray on jacko boards with a thin layer of SLC over the jacko board. The subfloor is 15mm osb and 22mm chipboard and not level hence screwing the jacko board at 300mm centres and wanting to put a thin layer of SLC. Any recommendations on the SCL to use? 3-4 mam thick and solid…
Any help appreciated
Dave
Has anyone fitting this or a similar tray with PU foam? Or is best to use silicone? Which PU foam or silicone…
I’m setting the tray on jacko boards with a thin layer of SLC over the jacko board. The subfloor is 15mm osb and 22mm chipboard and not level hence screwing the jacko board at 300mm centres and wanting to put a thin layer of SLC. Any recommendations on the SCL to use? 3-4 mam thick and solid…
Any help appreciated
Dave