mira

Hi, I need to adjust the max temperature on my Mira silver shower but am stuck at the first hurdle. Can anyone tell me how to remove the temperature control level? I can’t see a screw to loosen but it won’t just pop off. any advice appreciated. thanks, mark

Hi, I’ve been to quote for an en-suite for a customer and they like the idea of these digital showers . I’ve not fitted many of these digital showers and when I have it’s only been on unvented systems. Was wondering is the pressure and flow good on the digital showers ? I know you can get...

Just purchased a Mira Platinum shower (dual ceiling fed high pressure/combi boiler version), which will be installed in the loft directly above the shower area in a bathroom that I am refurbishing. I've read through the installation manual and a couple of things aren't too clear: 1. A couple...

I have a Mira Event XS Thermostatic power shower which I installed about a year ago. Today it has stopped working properly, as if it is only receiving water from the cold feed. The pump is working and water is coming out with good pressure when the thermostatic control is on cold. As soon as I...

Hi, we bought a Mira flight tray back in March (it’s been under the bed since then as we ran out of money to finish a second bathroom). We pulled the tray out, peeling the plastic off and it has a hair line crack on one side. Mira won’t do anything about - understandably. But it means that we...

Has anyone fitted a service kit on a mira 88? Watched a video on it on YouTube looks a bit of a nightmare, that many orings and cir clips. The shower is leaking out of the body when operated.

Hi. We have recently had a Mira Atom EV Thermostatic Bar Mixer Shower Valve & Kit installed. However, if someone takes a shower, all is good. However, if another person attempts to take a shower a few minutes later, then one of five things can happen. 1. Shower works as normal 2. Water...

I've read previous posts about loss of signal during showers, but i think my problem might be different.... 10yr old Mira Platinum shower. Situated in loft, just above the bathroom. No problems for 9years. the previous controller started suddenly switching off mid shower over a year ago. We...

Hi, my mira sport shower only gives out cold. Reading some posts I thought I would replace the thermal switch as its relatively cheap. But when I took the case off to check the switch before ordering I noticed this build up. Does anyone think is still worth replacing the switch or is it more...

Got called to sort out a Mira 415 going hot and cold intermittantly. First off checked filters, none in it and water at basin is hot. Changed cartridge in shower valve and its still doing the same thing according to the customer. System is mains pressure via a Worcester HiFlow, customer seems to...

I've got a customer who needs a mira 88 servicing. It had stopped regulating temperature properly for a couple of months and just recently its completely seized up, the dial will not turn. There's two service packs available, the cheaper one (936.12), which has all the o rings, spring, spindle...

hi I need your help, my Mira Event Xs packed up on xmas eve. I have a combi boiler with this power shower with a pressure reducing valve as we didn’t want to change the shower when we had the boiler fitted. The shower was working perfectly prior to the motor being noisy and packing up. I’ve...

Hi all, Mira Atom shower mixer will it work with gravity hot (0.1 bar) and mains cold dynamic (0.7 bar)?? Cheers in advance.

We have rediculously low water pressure. Just wondering if we would be better off with a Mira airboost or a pumped electric shower like the Triton T80si? Thanks

Hi I have a bar shower mira atom erd The problem is the brass thread under the bar shower wher the hose is screwed on to its leaking from inside and drippin from side of the thread. I hope you understand. Mira advised change the temp cartirage and still same problem matter of fact worse There...

Anyone had one o these (mira mode thermo mixer) getting crossflow from cold into the hot? Tia

Mira Platinum dual rear fed digital shower standard We've just had this shower fitted, but it does not work! Apparently there is not enough pressure for the pump to kick in so it just drips. It only works if we drop the pressure by turning on the shower in the other bathroom. Any advice on...

I have an issue I would really appreciate some advice on. I recently moved into an old house in need of renovation. Discovered that the shower (I think its a Mira Excel) was leaking into the kitchen. After much investigation I have determined that the leak is coming from behind the shower...

Hi all, I've just replaced a Mira event that worked fine for 15 years with 'up and over' pipework, which should have been 'down and under'. There's now air in the shower - of course - and I was wondering if there's anything I can fit that will let the air out. I am aware that I should have...

I'm stuck. How do I release the pipes from the old shower? They have an o seal connection. Thanks Sean.