high

  1. Leo21

    High efficiency pumps and programmers, beware.

    Today i fitted a new lifestyle 112 on a gravity system, and I couldn't stop power going to the pump. Rang lifestyle, and the draw from the pump fuses the programmer into constant power to the pump. A resistors required! I fitted the pump three months ago, oh joy.
  2. R

    High flush wc - siphon & inlet valve

    Hi Friends How long would it take you to change both the above? Cheers
  3. T

    high level WC downpipe

    Hi, I have a situation whereby the cistern of a close coupled WC won't sit on the wall where I'd like it to go, so I'm looking for an alternative solution. The wall in question was originally an external wall and so the end of a nice thick slate window sill (which I don't want to damage)...
  4. E

    Worcester 440 high flow

    My mate got problems getting hot water , only got heating , I took off the divertor motor , noticed pin was out with power off he started getting hot water but no heating , I changed motor (£100) part only . plugged it all back , still no good any ideas ,
  5. M

    high CO reading on worcester 28i rsf boiler

    hi there, mahogany new member to this site. getting high CO reading on Worcester 28i rsf Gc no 47 311 54 burner pressures ok gas rate fine removed burner,removed heat exchanger removed and washed through fins ,took out fan, checked flue all ok.spoke to Worcester technical who said it must be...
  6. G

    USA High oil usage

    Hi, We've just had an extension built and a new oil boiler installed (Greenstar 25/32 CF /RS). The original oil boiler was a worcester bosch that was at least 15- 20 years old. It used about 1500 litres oil per year. The new boiler used 1000 litres in its first 3 months and it looks like...
  7. F

    High Flow rate pressure reducer valve

    Hi, I have my presure reducer valve in my kitchen set to 3.5 bar and from that I am geting a flow rate of around 12l per min. I have read on the internet that I should be getting a far higher flow rate from 3.5 bar of presure. Can you let me know what you think? Do you think the presure...
  8. F

    Condensation coming from flue, high ratios, new install

    Just installed an ideal logic I-mini and condensation seems to be coming from the flue, also the ratios it's giving off are high 0009. I've checked the boiler (heat exchanger, condensate trap) but to no avail. I was thinking it could be the gas valve. Any suggestions? Thanks
  9. D

    Pressure slightly high after repair

    Hi I had someone round today to fix a radiator that had come off the wall and was leaking slightly. That is now fine but while he was working, after sorting the radiator he topped the pressure in the boiler up to 1.6 bar when the heating is off. Just had the heating on and noticed it is now...
  10. T

    high limit stat

    Hi was just looking a second opinion on a job ive to look at. Its a old grant 50/70 euroflame. Its on an open vent system with no stats inside house. The high limit stat trips most days not while its in its cycle . Im told it wotks ok then just trips out after it switches off at time clock. I...
  11. F

    Biasi riva compact he 28 high Co ppm reading

    Hi guys, Had a landlords cert this morning for a empty rental property, biasi riva compact he 28. The combustion reading where Co ppm: 1170, co2% 8.8, ratio : 0.0132. Will be doing a full strip down service and adjusting the min max gas pressure at valve. Would this be enough to bring...
  12. W

    High efficiency gas fire or wood burning stove?

    Guys, I've been thinking for some while now about sticking a woodburner in the lounge. However, I've noticed many are doing much the same, and as such, the wood costs are creeping up. I can source my own wood too, however, when I factor in petrol and time costs I'm starting to think H.E Gas...
  13. J

    Low Pressure taps - high pressure system

    Hello I have seen some taps/ shower head i like for my bath. on the website it says " suitable for all baths with low pressure water systems" " Liquid Pressure 0.5 bar" I live in a new build with a combi boiler which shows just under 2 bar. Can i use theese taps? does it really...
  14. R

    Ashford (middlesex) or High Wycombe. Or both?

    Going to look at some potential new branches tomorrow. So who wants to share their insights into the merchant competition in Ashford (middlesex) and High Wycombe?
  15. eagleeye

    Estimate. Too high or too low ??

    Hi guys, need your opinion on this. quoted for a job a job a few weeks ago and he came back to me to see if I could do a better price. Repriced it but only by 450 quid. Job is to convert old open vent heating and hot water system to a sealed system. Its a 4 story house in Islington. All gear...
  16. S

    Brand New Showers And Ideal And Worcester High level Flue kits (Plume Kits) Updated

    Need to start making room in my house. Ideal high level plume kit fits most ideals £40 posted Worcester High level Plume £40 posted Mira Sport 9.8 kw white and chrome OLD style £130 posted Mira Sport 9kw White and chrome New Style £120 posted Mira Adavanced 9KW ATL White and chrome New...
Back
Top