fixed

  1. D

    Fixed Head Shower Plumbing

    I have a low pressure system with 2 x 22mm pipes going from the loft tank and HWC to the full flow bath mixer/shower taps. The bath taps head is 0.25 bar. The flow rate at the bath with both taps on is 32l/min. The bath mixer/shower tap has 2 x 5mm diameter holes within the diverter that feeds a...
  2. H

    Fordham toilet overfilling - what's wrong and how can it be fixed? Help

    My toilet is constantly filling, I can always hear a trickle, this is resulting in the over flow pipe constantly dripping outside house. Can anyone tell me what's wrong and how to fix this? Pictures attached. Thanks for any help
  3. R

    WHY are some combis fitted with an integral or fixed filling loop?

    I have a main Eco 30 that i am working on and the Filling loop needs replacing. OE is £60. There are a few online around £30 (4 day wait) or I can use a flexi. Just wondering which way to go here. Also it is always advised that flexi's be removed - WHY since the fixed one obv isn't.
  4. C

    Update on Grundfos UPS2?

    Are there still some startup problems with these circulators? Most of the comments are now a few years old, though the sensitivity to spikey voltage was mentioned only a couple of months ago. I would also like to ask if these problems occurred when on a proportional pressure speed setting or...
  5. R

    Fixed shower riser leaking

    I have a fixed shower riser going onto a threaded 2 way diverter . It leaks between the nut which is part of the rail and the actual rail. It seems like it should have a o ring as it is slightly loose . I have the washer in place ? Cust brought of Ebay so might be faulty . many thanks
  6. S

    ideal logic 30 problem

    hi guys, i need some advice please my combo boiler is driving me mad i have had three different engineers out to look at it as it was making a loud humming noise they all reckoned they fixed it but did not, so i started searching for advice as my hot water was not heating up properly but the...
  7. hammers4spanner

    New gas anaylser

    Unsure what to do here , my testo has gone ping now so in the market for an upgrade . Are the TP1 'S any good or complete waste of money?
  8. P

    Help! steel to copper pipework join

    Help! I've posted a picture to help explain my issue. I had a leak in a pipe. A corroded pipe to the right of join C, there was a hole in it. The leak was not at the join, rather about an inch or so to the right of join C. That pipe has been replaced. Prior to the pipe being replaced the 3 way...
  9. C

    oil pump on riello

    fitted a new one, old one was seized , replaced bearings in motor and cleaned the fan whilst I was there to make sure all was spot on , but its still humming and not turning, it does work when I switch it on - off and reset it , but only half the time, what would it be? capacitor?
  10. hammers4spanner

    fixed price repair

    Went out to a wozzie high flow 400 today , expansion vessel kaput and pump weak as you get . Got a price of parts and then added my labour would of come to about £300.00. In the time the customer just for a second quote decided to contact wozzie themselves and they offered a fixed price repair...
  11. F

    which Kane is best?

    I have used a few different FGA's and have ruled out the Antons, I like the Kane's best but which should I buy? 251, 255 or the 455? I will only be doing domestic mostly boiler installs and CP12's Any feedback welcome Thanks
  12. Dan

    Forum Signatures Fixed

    .. for those that had the issue. Let me know if you have any other problems. You should be able to add links now, but not change the font size (some were quite large and sometimes getting confused with actual content).
  13. M

    Fixed price breakdown diagnostic?

    Anybody do fixed price breakdown diagnostic? All I get is every time if get a phone call is how much will it be? So I say I charge £40 for the first hour £30 after that, I then get how long will it take you? Then I go through saying well 9/10 times I know what is wrong within the first hour...
  14. S

    Inserting tap isolator into fixed pipework in situ

    Hi all I'm new to plumbing and I want to install some isolator valves for a couple of taps in a house I've just moved into. I've seen just about every video on the Web on how to use compression joints and that all seems pretty straight forward. The problem is this. ... The taps are...
  15. W

    Fixed price plumbing

    Hello chaps, just after your opinions on fixed prices for plumbing works. i work for a housing assoc in week and have weekend work for myself. I have been having issues with pricing as custards saying too I was too expensive, but I have usually worked on a daily rate basis £150 - £200 per day I...
  16. G

    Heatrae Sadia

    Looking to convert over the sink discharge pipe on a Heatrae Sadia to a fixed tap on sink Can i extend pipe work to a fixed tap leaving the supply valve to tank constantly open or would i need to fit a header tank.
  17. W

    Fixed prices based on estimated timescales.

    Let's say you give a fixed price for a job you expect to take somewhere between 1 and 2 hours. It could rarely take less than 1 and could rarely take more than 2. When you work out your price (presuming you don't supply custard with explanation of how many predicted hours were allowed for - but...
  18. K

    Triton Satellite Digital Shower with Fixed Head HP

    Hi I have a Triton Satellite Digital Shower with Fixed Head and remote control that feeds directly from a combination boiler. It worked fine for the first 11 months, then it started 'pulsing' the water out of the shower head. The water seems to drop slightly in temperature and then get warmer...
  19. stani

    Where is the weirdest place you've fixed a leak.

    As the title says, where is the weirdest place you have fixed a leak? this is mine today, the lead pipe was punctured by a nail. tel:0843%20538%200393 anyone guess where it is?
  20. I

    Commercial to domestic changeover??

    Hi everyone ive seen umpteen courses for domestic to commercial but none for commercial to domestic. Anyone one know why this is or anywhere that does it? Cheers
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock