I have a slightly undersized radiator in my living room. The calculation says 6315 btus and my rad is 6019 btus. It was a replacement radiator, the same size as the previous one (so pipes were in the right place). There is a gas fire in the room as well. Should this undersizing cause a problem. To move up to a p+ rad would make the radiator about 30% oversized. Thoughts please.
Similar plumbing topics
I have had some old radiators replaced. Having checked the btu calculation myself, the new radiator is slightly undersized. It should have been...
Would like some help please as my Drayton Wiser system is a mess.
I had 2 TRVs in the lounge, one in the main bedroom, the rest of the house - 6...
Hoping somebody can help, So, in a nutshell…
Standard 90s Westbury home – condensing boiler, pump, wall thermostat, etc etc... Normal, common or...
Having recently replaced my condensing gas boiler, i decided to upgrade two small double radiators which were located in a room which had been...
Hi, I am not in UK and the rising fuel and gas prices are forcing me to change my boiler to an efficient one. Right now I have an old non...