Search the forum,

Discuss Worcester RI range,boiler differences in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Messages
16
Hi all new member here.

I currently have an 18ri boiler,i want to change it to a 24ri.
Whats the difference between them,all the parts inside seem identical,is it just a software change,or the key plug on the main card.
Would rather change a small part,not the whole boiler.

Any help much appreciated.
Matt
 
new boiler im afraid
 
sorry cant help any further but gas regs and manufactures dont allow it
 
so if all the parts are the same inside,whats the difference.
the part numbers are the same.
Lets forget my origional question,whats the difference in the parts ?
or what are the different factory settings,
 
yes 10000% sure you can’t modify a gas appliance
 
are you absolutely sure about that,not even a 37cdi ?
Thats the rules
Im sure you could swap parts and wire it up to your Laptop if you wanted
The first Person who inspects the boiler will condemn it
If the worst happens your house Insurance will void and you will likely go to prison
 
hows that go to do with boilers :D and yes i did play conkers before the bad sports ruined it
 
We'll face a prison sentance soon for changing the exhaust on our cars,or changing the wheels for another set.The way its going if you touch anything mechanical or electrical,your nicked !.
 

Reply to Worcester RI range,boiler differences in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Hi All I have a leak coming from within my Mira Elite QT shower. It seems to be flowing from behind the switching Control. Any ideas what could be causing this leak. Already Changed the Pump Elbow as one of the clips had popped which was causing a second small leak, Any idea? Is it time to buy...
Replies
0
Views
221
We are from Alberta, and I own an electrical company. I have been asked by a BC Mechanical P. Eng. to install an emergency STOP button at the man-door to the boiler room. It's intent is to 'halt' the operation of the boilers in the room should there be an emergency. He is demanding that I do...
Replies
5
Views
207
Hi, basic question, any insight much appreciated. Looking to have an outdoor tap in my front porch fed from 15mm pex coming up from suspended floor. Pic 1 is inside porch, pex temporarily clipped to give an idea of pipe placement (ignore shoddy blockwork of booted cowboy builder!), Pic 2 is...
Replies
6
Views
216
We run a community village hall and have a large kitchen provided for the use of hirers. This includes a Lincat SLR9 gas cooker which I believe is a 23.8Kw appliance with all six burners and oven on max. This was installed some 10 years ago and has passed all subsequent Gas Safety inspections as...
Replies
3
Views
350
Hi, Can anyone advise as to why the cold water to my bathroom keeps airlocking? This originally happened about 12 months ago and has happened 3-4 times since. It’s an upstairs bathroom, fed from a tank in the attic. The tank is about 8 Meters away and feeds a bath, sink and toilet. The tank...
Replies
9
Views
297
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock