Search the forum,

Discuss Worcester Greenstar 24Ri Condensing Natural Gas Boiler in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.

CXR100

Plumbers Arms member
Plumber
Gas Engineer
Messages
889
can this be converted to a LPG by a gsr plumber???
 
Yes there is a LPG conversion details in the manual. Or buy the LPG ready boiler
 
do you need a conversion kit or is it a adjusting a gas valve type??? just thinking if it would be expensive to change it to lpg or jest get a lpg one
 
so there is no way the fitter could convert it?
The conversion kit consists of a sticker, a code plug which plugs into motherboard, that tells boiler it's now LPG, alters fan speed, ignition attempts reduced from 5 on NG TO 3 on LPG, and few other settings, then the gas valve if a sit valve can be tuned via FGA TO LPG co2 settings
 
Status
Not open for further replies.

Reply to Worcester Greenstar 24Ri Condensing Natural Gas Boiler in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

We are from Alberta, and I own an electrical company. I have been asked by a BC Mechanical P. Eng. to install an emergency STOP button at the man-door to the boiler room. It's intent is to 'halt' the operation of the boilers in the room should there be an emergency. He is demanding that I do...
Replies
1
Views
70
We run a community village hall and have a large kitchen provided for the use of hirers. This includes a Lincat SLR9 gas cooker which I believe is a 23.8Kw appliance with all six burners and oven on max. This was installed some 10 years ago and has passed all subsequent Gas Safety inspections as...
Replies
3
Views
180
Recently had a Viessmann Vitodens combi boiler installed, quite often when the adjacent cold mixer tap is opened the boiler starts for a few seconds! Can anyone tell me what is causing this? And how to cure?
Replies
3
Views
184
Hello, I am seeking some advice, I have a POTTERTON PROMAX 28 COMBI Boiler and I noticed yesterday that the water around the house is no longer warming up. The heat exchanger has been changed 6 months ago, so I do not believe it is that. Does anyone have any ideas on what it could be? Thanks
Replies
4
Views
168
Our kitchen mixer tap has started dripping. Like so much of the plumbing in our almost new build bungalow, it is lacking! The plumber didn't install any isolating cocks in the H&C feed to the tap so how can I identify which of the valves is passing? Shut the whole H&C water system down?
Replies
7
Views
200
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock