Search the forum,

Discuss Worcester Bosch Greenstar 24i Junior cuts out during use with reset button flashing red in the USA area at PlumbersForums.net

Messages
2
Hi

So this morning I was having a shower and suddenly my hot water went completely cold. I jumped out and had a look at my boiler. I noticed that the burner had stopped and the reset button was flashing red. The blue oval shaped light in the middle was on and stable (it was blue). I reset the boiler and went back into the shower only for the same thing to happen again 15 minutes later.

This has never happened before and I am concerned. I have contacted Bosch and they have no idea what could be wrong and have attributed it to an unknown fault. They told me that the blue oval light usually changes to indicate the type of fault.

My boiler's blue light has not changed. It simply cuts out and the reset button flashes red until I reset it.
Any thoughts on what could be causing the problem. Just recently managed to 30 minutes of use out of it before it cut out. Pressure reading is ok.

Happy to provide more info if required.
 

Reply to Worcester Bosch Greenstar 24i Junior cuts out during use with reset button flashing red in the USA area at PlumbersForums.net

Similar plumbing topics

Hi All I have a leak coming from within my Mira Elite QT shower. It seems to be flowing from behind the switching Control. Any ideas what could be causing this leak. Already Changed the Pump Elbow as one of the clips had popped which was causing a second small leak, Any idea? Is it time to buy...
Replies
0
Views
202
Hi, Can anyone advise as to why the cold water to my bathroom keeps airlocking? This originally happened about 12 months ago and has happened 3-4 times since. It’s an upstairs bathroom, fed from a tank in the attic. The tank is about 8 Meters away and feeds a bath, sink and toilet. The tank...
Replies
9
Views
250
The fittings below are for a mixer bar attached to a self contained shower. i.e not a wall. The attaching screws have snapped. I could get two new brackets, dismantle that existing one and start again or I could try and re attach via those screws, removing the broken ones from the plate and wall...
Replies
0
Views
108
Hi all I'm hoping someone can shine a light on this for me Since our stop tap on the pavement has now been filled with sand for whatever reason, we are relying on our property fitted stopcock (this is outside on our garage wall) Unfortunately turning this to the closed position only reduces...
Replies
2
Views
147
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock