Search the forum,

Discuss Wirsbo/ uponor pipe repair in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.

mutley racers

Plumbers Arms member
Plumber
Gas Engineer
Messages
5,167
Hi All. I hope you're well.

I need a bit of advice. Someone is having their engineered floor replaced which was installed 20yrs ago with underfloor heating. As the flooring people were taking up the old board they noticed a pipe came up with it. It has had a nail through it for 20yrs with no leak. Quite amazing really.

Any way, I need a part that will fix it tomorrow as the new floor is basically installed and ready for sanding and staining for new people to move in on Tuesday.

Problem is, it takes 2-3 days for the parts from Wolesey and I don't know anyone else that stocks them

Anyone know who will have these in stock?

These are the parts needed: uponor 1006641, uponor 1065290

Any guidance would be great.

Cheers
 
16mm mut ?
 
20mm Shaun

20180718_141751.jpg
 
Problem is it's old these days it's 16mm

If the wall is 2mm thick which I can see it being they will work

Pressure test after repair
 
It says 20 x 2mm on the side of pipe in the picture.

Scary though burying it when Uponor say no. If it goes wrong it is costly
 
It says 20 x 2mm on the side of pipe in the picture.

Scary though burying it when Uponor say no. If it goes wrong it is costly

Dopey me didn't see :D
Pressure test to 6 bar if it holds its golden
 
Status
Not open for further replies.

Reply to Wirsbo/ uponor pipe repair in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Creating content since 2001. Untold Media.

OFFICIAL SPONSORS

OFFICIAL SPONSORS

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock