Search the forum,

Discuss Who is best for servicing Kane FGAs? in the Oil and Solid Fuel Forum area at PlumbersForums.net

Messages
104
Whos' best for servicing Kane FGAs?
Do you send them back to Kane or use an independent?
 
Direct back to kane I always do
 
The service is really good. The only issue I have is the batteries went in mine the other day and when I took them out they were non rechargeable. (I have been charging it for months). Never had it sent back with no. Rechargeable in before
 
Very impressed with the service by Kane. My analyser was posted back to me the same day received. Free roll of printer paper and a couple of tea bagsđź‘Ť
The service is really good. The only issue I have is the batteries went in mine the other day and when I took them out they were non rechargeable. (I have been charging it for months). Never had it sent back with no. Rechargeable in before
i was doing the same. Thought it was broken but they gave me non rechargeable batteries
 
I've had it before where they swap out your rechargeables for others. I had some dodgy ones once so replaced them with brand new which cost an arm and leg as they're special ones only for them to swap them out for someone elses at Service!
Had an analyser back before too with the Infra Red printer sender no working, when it did when it went in. Also had a faulty switch once which I mentioned on service and didn't get rectified, took it back and to be fair they did it FOC.
 

Reply to Who is best for servicing Kane FGAs? in the Oil and Solid Fuel Forum area at PlumbersForums.net

Similar plumbing topics

Hi guys. I'm trying to identify a toilet model before ordering a seat for a customer. I went to what used to be a Roca stockist (they no longer are) and one of the guys there reckoned it might be "The Gap". I went to the new stockist and the guy there disagreed it was "The Gap" and that he'd...
Replies
2
Views
102
Hi all I'm hoping someone can shine a light on this for me Since our stop tap on the pavement has now been filled with sand for whatever reason, we are relying on our property fitted stopcock (this is outside on our garage wall) Unfortunately turning this to the closed position only reduces...
Replies
2
Views
136
  • Sticky
Morning to any Australians lurking around! Register its free, then message me, I'll sort your account out for you. We will need a moderator from each main country too. I'll post this in the Australian forum now.
Replies
0
Views
49
IS IT POSSIBLE TO ADJUST THIS MIXER UNIT? WE HAVE TO HAVE IT TURNED ALMOST FULLY ANTI CLOCKWISE TO GET HOT WATEROUT. THE FRONT PLATE WITH MIRA ON IT PRISES OFF AND INSIDE THERE ARE SOME PLASTIC BITS AND A SMALL CROSS-HEAD SCREW IN THE MIDDLE. THANKS
Replies
6
Views
170
Hi, basic question, any insight much appreciated. Looking to have an outdoor tap in my front porch fed from 15mm pex coming up from suspended floor. Pic 1 is inside porch, pex temporarily clipped to give an idea of pipe placement (ignore shoddy blockwork of booted cowboy builder!), Pic 2 is...
Replies
6
Views
188
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock