Search the forum,

Discuss Which pump, pressure vessel? in the Plumbing Jobs | The Job-board area at PlumbersForums.net

dan_the_plumber

Gas Engineer
Messages
437
Im looking to buy a pump pressure vessel (like a garden sprayer) to pump inhibitor into radiators.
I’m unsure which one to go for. Has anyone any experience of using one for this purpose and Can anyone recommend a good one please?

Dan :)
 
Why don't you just use the rapid dose stuff?
Well first of all I don’t like using too much packaging especially airosols. Also I can use the pressure vessel for dosing caravans with anti-freeze and also blowing water lines out for the winter :)
I’m also working on a theory that I could use the pump vessel to start a syphon effect to drain a hot water cylinder :)
 
One like this? I have the old manual version with the two braided hoses which I love.

1A29A37C-C425-4FAC-922F-096F5A0A8ABD.png
 

Reply to Which pump, pressure vessel? in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Hi All I have a leak coming from within my Mira Elite QT shower. It seems to be flowing from behind the switching Control. Any ideas what could be causing this leak. Already Changed the Pump Elbow as one of the clips had popped which was causing a second small leak, Any idea? Is it time to buy...
Replies
0
Views
202
Hi guys. I'm trying to identify a toilet model before ordering a seat for a customer. I went to what used to be a Roca stockist (they no longer are) and one of the guys there reckoned it might be "The Gap". I went to the new stockist and the guy there disagreed it was "The Gap" and that he'd...
Replies
2
Views
108
Hi, Can anyone advise as to why the cold water to my bathroom keeps airlocking? This originally happened about 12 months ago and has happened 3-4 times since. It’s an upstairs bathroom, fed from a tank in the attic. The tank is about 8 Meters away and feeds a bath, sink and toilet. The tank...
Replies
9
Views
245
Hi all I'm hoping someone can shine a light on this for me Since our stop tap on the pavement has now been filled with sand for whatever reason, we are relying on our property fitted stopcock (this is outside on our garage wall) Unfortunately turning this to the closed position only reduces...
Replies
2
Views
143
Hi, basic question, any insight much appreciated. Looking to have an outdoor tap in my front porch fed from 15mm pex coming up from suspended floor. Pic 1 is inside porch, pex temporarily clipped to give an idea of pipe placement (ignore shoddy blockwork of booted cowboy builder!), Pic 2 is...
Replies
6
Views
195
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock