Search the forum,

Discuss Which Inhibitor for Vaillant Ecotec ? in the USA area at PlumbersForums.net

Messages
150
Had system drained and replaced 3 rads. Just wanted to know is any inhibitor ok or does vaillant have a recommended brand?
 
Most manufactures recommend Fernox or Sentinel as desc in the manufactures instructions. Do you know what was added at the time of installation?

No Idea.

I have a local wickes and the have the Sentinel X100?

The system doesnt have a filter - should I take this opporunity to get that installed as well?

Wickes sells the Magnaclean Pro 2.

If thats the case then I will get a plumber to do both?
 
Vaillant say use inhibitor but are not specific about the brand. If the system has been flushed either Sentinel or Fernox will do fine. Make sure you put a note of the make type and dose somewhere appropriate, e.g. a sticker on the boiler. I like a luggage label tied to the drain point too.

You should certainly get a magnetic filter installed.
 
Vaillant say use inhibitor but are not specific about the brand. If the system has been flushed either Sentinel or Fernox will do fine. Make sure you put a note of the make type and dose somewhere appropriate, e.g. a sticker on the boiler. I like a luggage label tied to the drain point too.

You should certainly get a magnetic filter installed.

Dose?

I have 7 radiators with a combi. I just assumed you would use the full 1l.
 
What is in these instructions (circa 2014 models):
 

Attachments

  • A8FCF21A-74FC-4CC2-B427-910949951E0E.jpeg
    A8FCF21A-74FC-4CC2-B427-910949951E0E.jpeg
    94.8 KB · Views: 8
  • 9C56E0D1-ACE1-46AA-9F62-6A1D1A1F21D1.jpeg
    9C56E0D1-ACE1-46AA-9F62-6A1D1A1F21D1.jpeg
    158.2 KB · Views: 8

Reply to Which Inhibitor for Vaillant Ecotec ? in the USA area at PlumbersForums.net

Similar plumbing topics

Hi, My current hot water system needs to be replaced. Anyone got any suggestions or can recommend any plumbers around Derrimut area that won't rip me off? An office guy recommended me to apply for government rebates and get it installed through timetosave.com.au. How reliable is this...
Replies
6
Views
270
Hi All I have a leak coming from within my Mira Elite QT shower. It seems to be flowing from behind the switching Control. Any ideas what could be causing this leak. Already Changed the Pump Elbow as one of the clips had popped which was causing a second small leak, Any idea? Is it time to buy...
Replies
0
Views
218
I want to reconnect some outbuildings to an existing water supply. The supply pipe is old 22mm MDPE and buried for a fair distance so not going to dig it up and replace it 😬. Question is can I use normal 22mm plumbing push-fit connectors to make the connection as finding 22mm MDPE fittings...
Replies
1
Views
246
Our kitchen mixer tap has started dripping. Like so much of the plumbing in our almost new build bungalow, it is lacking! The plumber didn't install any isolating cocks in the H&C feed to the tap so how can I identify which of the valves is passing? Shut the whole H&C water system down?
Replies
9
Views
273
Hi, Can anyone advise as to why the cold water to my bathroom keeps airlocking? This originally happened about 12 months ago and has happened 3-4 times since. It’s an upstairs bathroom, fed from a tank in the attic. The tank is about 8 Meters away and feeds a bath, sink and toilet. The tank...
Replies
9
Views
289
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock