Discuss which fitting? radiator 15mm pipe to central heating valve in the Plumbing Forum | Plumbing Advice area at PlumbersForums.net

Messages
4
Reaction score
0
HI!
i am a new member and only a DIY'er
i have had to replace a radiator with a smaller one
i need to extend the outlet of the radiator by 6" using
15mm copper pipe...what fitting do i use to connect
the pipe to the system valve (which has the original radiator fitting connected )
regards
 
Test4Less - PlumbersForums.net Sponsor
This official sponsor may provide discounts for members

ShaunCorbs

S. Mod
Plumber
Gas Engineer
Messages
23,544
Reaction score
6,431
any pics of the valve you need to go onto
 

ShaunCorbs

S. Mod
Plumber
Gas Engineer
Messages
23,544
Reaction score
6,431
upload a file right of post reply
 

ShaunCorbs

S. Mod
Plumber
Gas Engineer
Messages
23,544
Reaction score
6,431
best way would be drain down and either adjust the pipework or install a new valve

eg

https://www.screwfix.com/p/drayton-07-05-900sx-white-chrome-angled-lockshield/7877g

https://www.screwfix.com/p/compression-adapting-male-coupler-15mm-x/67110#_=p

and use a piece of 15mm chrome pipe between the rad and valve

if you dont want to drain down

https://www.screwfix.com/p/compression-adapting-male-coupler-15mm-x/67110#_=p

https://www.screwfix.com/p/compression-adapting-female-coupler-15mm-x/76567

and a piece of 15mm chrome
 
OP
P
Messages
4
Reaction score
0
upload a file right of post reply
thanks very much will check it out♪♪
 
Test4Less PlumbersForums.net Sponsor
uHeat Forum Sponsor - PlumbersForums.net
Plumbing Advice - Find Plumbers Jobs
Corgi Direct - Plumbers Forums Sponsor
Wetroom Store - PlumbersForums.net Sponsor
Power Shower Booster - Official PlumbersForums.net Sponsor
Plumbase - PlumbersForums.net Sponsor

Latest Plumbing Advice

Top Bottom