Search the forum,

Discuss What's the favourite RF Prog Rm stat? in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.

Last Plumber

Esteemed
Plumber
Gas Engineer
Subscribed
Messages
4,814
As title really. If you had to recommend one, which is it?

I use Honeywell but find the connections a wee bit small.

I probably use them through habit and I only use them when I'm not installing a Vaillant.

What are you lot using ?
 
Honeywell or centre brand. They seems to lose a few minutes each month though

I find Honeywell (CM927) to be the best of fairly a weak field. Their time keeping spec is pretty poor to start with (10 mins/year IIRC) and they seem to be significantly worse than this in practice. I think this is a design flaw as pairs seem to stay in sync nicely they just both tell the same wrong time. They have a long history of LCD displays failng prematurely. I keep hoping the ones currently being sold won't suffer from but I'm probably deluding myself.

I like the fact that, with some jumping through hoops, one can synchronise multizone duty-cycles with them but they have a minimum ZV call that is too short (30s) and can't be increased.

Why do I use with them? Inertia/laziness probably. They're the devil I know, they are fairly easy to programme and the TP control works well and keeps the temperature rock steady.
 
I also use the cm927 fitted dozens of them with very few faults but they are now being phased out with a new range from honeywell the T4 i believe cheers kop.

Screenshot_2017-10-24-05-32-22.png
 
We recently installed delta dore tybox which seemed to me not bad product to be honest.
 
Status
Not open for further replies.

Reply to What's the favourite RF Prog Rm stat? in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Hi guys. I've been running an UFH installation/ repair business for 7 years now and one of my main frustrations is finding the parts for the UFH. I've got quite good at it over the years being able to recognise the manifold brand and generation by just looking at it but then I have to go through...
Replies
1
Views
183
    • Like
Hello hello,, Hoping there are some experts or experienced Bulgarian plumbing chaps in this site ?. Here in the UK I can fit a bathroom just with the experience I have picked up over a lifetime. I can make copper pipe runs isolaters taps sink shower etc but me and the missus have bought a small...
Replies
2
Views
241
Hi All I'm planning on replacing a couple of rads soon as they are far too small for the size of the room causing the room to take an age to heat up but they are all connected via what I assume is Hep2O nothing is labled on the pipes that route behind the rad just on the flap behind the rad...
Replies
5
Views
672
  • Question
I have a question that I’m hoping those of you who are experienced central heating engineers may be abler to throw some light on. But first I need to tell you about my system, and the problem I’ve been having. Just over 7years ago I had a new CH system installed in my small semi. I say new – in...
Replies
6
Views
470
Hi I've purchased a GROHE | Euphoria 260 Exposed Shower ( looks nice ) however Im missing some initial connecting adapters the installation instructions say it comes with " easy install adapters " and threaded tape ....I have neither of these ,all I have is the " S " unions ... so I did a bit of...
Replies
18
Views
2K
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock