Search the forum,

what size holesaw?

Discuss what size holesaw? in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
M

mutley racers

Esteemed
Plumber
Gas Engineer
Subscribed
Messages
5,172
Hi again, Can you guys please tell me what size holesaw cutters you need to make the connection of a 32mm strap on boss and a 40mm.

Cheers
 
57mm or 2 1/4" hole for your strap-on. This is for both 32mm and 40mm pipe as the rubbers are the bits that hold your pipe in the boss.
 
do you mean the hole in the soil stack? My strap on just has a extended circular bit of plastic at the bottom.
 
Yes i mean the hole for soil pipe using polypipe (sure other manufacturers will be the same) strap on boss. Unless you got some other type of strap-on, i dont know.
 
Status
Not open for further replies.

Reply to what size holesaw? in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

B
What is correct toilet supply line
Hi. I need a new toilet supply line but donā€™t know the size type of the fitting at the shut off valve. It is not 3/8 compression. It is a plastic nut about the same size as the one going into the cistern but has a different thread. Attached is a photo. Can you advise. Thanks.
Replies
2
Views
180
ShaunCorbs
ShaunCorbs
P
LCS to new water mains
Hi, I have an old steel water mains pipe (approx 45mm) that I need to connect to a new pehd water mains (25mm). I can't get at it to create a new thread so what's the best way of connecting the two? Cheers, Peter
Replies
2
Views
186
ShaunCorbs
ShaunCorbs
jamespipe
Plumber recommendation for heat pump HWS installation
Hi, My current hot water system needs to be replaced. Anyone got any suggestions or can recommend any plumbers around Derrimut area that won't rip me off? An office guy recommended me to apply for government rebates and get it installed through timetosave.com.au. How reliable is this...
Replies
6
Views
276
oz-plumber
O
Stigster
Does anyone know the name of this model of Roca toilet?
Hi guys. I'm trying to identify a toilet model before ordering a seat for a customer. I went to what used to be a Roca stockist (they no longer are) and one of the guys there reckoned it might be "The Gap". I went to the new stockist and the guy there disagreed it was "The Gap" and that he'd...
Replies
2
Views
128
Stigster
Stigster
T
22mm MDPE connection
I want to reconnect some outbuildings to an existing water supply. The supply pipe is old 22mm MDPE and buried for a fair distance so not going to dig it up and replace it šŸ˜¬. Question is can I use normal 22mm plumbing push-fit connectors to make the connection as finding 22mm MDPE fittings...
Replies
1
Views
253
ShaunCorbs
ShaunCorbs
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock