Search the forum,

Discuss Wet vacuum advice? Mid budget up to £100 in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Hi everyone! New to the site and the forum. I have a question, can you recommend a decent wet vac? Is wickes one the best option out here?
 
I have the Wickes and it's the most basic machine but I just use it for wet with just the hose end for spills etc. If you intend to use it for both wet and dry and want or need better quality tools with a larger capacity I'd consider the other recommendations.
 
I bought the Henry version but I use it just for heating and water if I ever have to work on anything nasty like a Saniflo I factor a cheap wet vac back into the quote
 
Big chrome titan from Screwfix. Wheels broke almost immediately. Love the thing. His name is R2D2

Funny story - I watched a young labourer sweep up a load of ground concrete. He then went to hoover it up. He put the hose into the wrong hole on the hoover. The other hole does not suck. You know what it does.

POOF!

The room disappears in a grey coloured whiteout.
 
If you are going to get the titan from Screwfix be aware the lid/motor unit is not held on tightly so when carrying it with a ltr or two of fluid if you bump it the motor unit & can will seperate & the fluid will spill out.

When it has more fluid in it than that the weight holds it locked.

As mentioned above it sucks like a pro... and can usually recover the fluids spilled when carry it partially loaded apart from when the customer has white/light carpets.... apparently...

I still have mine despite a couple of spills in houses when carrying it & a few times when it tipped over in the van after a long day when i forgot to fully empty it out prior.

Also have a older Einhell wet vac which has none of the above issues of detachment of top motor unit from bottom can.

Hope this helps,

Andy
 
I have the wicked one. It's about 5 years old now and still going strong just a bit wobbly now as I've lost a wheel. I only use it for wet as I can't be bother to keep changing the filter etc.
 
Trufax. Luckily only blew a bit out as was only just under the surface of the "fluid"
It was a wetvac with 2 sockets for the hose - suck and blow. In my haste I picked blow.
 
I have the Titan one from screwfix too, it's great. I played about £40 for the smaller one I think. I mainly bought it just for dry stuff but needed to get some water out of some central heating pipes and remembered it was a wet vac too, it made the job so easy.

The only thing you have to make sure is it's properly dry before you put the bag back in otherwise it'll go soggy and split
 
I have the wicked one. It's about 5 years old now and still going strong just a bit wobbly now as I've lost a wheel. I only use it for wet as I can't be bother to keep changing the filter etc.

Don't need to Millsy, it'll still suck up dry material with the combi filter. Just leaves a bit of a mess to empty.

When I bought mine it was £25, now it's over £40 the other wet n dry's available come into play for value for money.
 

Reply to Wet vacuum advice? Mid budget up to £100 in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Hey all, Looking for some advice. My mother recently had her boiler changed but in the process the water had to be turned on and off as you would expect and the engineer broke of the handle. Luckily it seems you can close the valve with some pliers on the but I don't believe this is best for...
Replies
5
Views
210
I'll start this by saying I'm hoping to sort this by diy / minimal professional help as I'm a very tight budget! I've got a walk-in shower in a wet room. The shower has a tiled-over former with an additional ring of tiles around it. When the shower's in use, a drip comes through into the room...
Replies
6
Views
947
M
Hi all Moved in to a new house a few months ago. The previous owner had installed an accessible wetroom with nonslip flooring, handrails, etc. We've been using it but have started to notice that some of the floor tiles make a squelching sound when you tread on them and a little water emerges...
Replies
5
Views
458
Hi guys, looking for a bit of advice. I'm experimenting with heating solutions for my outdoor potting shed & workshop & I'm putting together an electric tube heater connected to copper heat pipes. Now I'm starting off small just as an experiment to see if I can do it & then upscale if needs be...
Replies
3
Views
715
Hi everyone! Parents not used the boiler since 2013/2014, since installing a new wetroom for them they have now decided its worth getting the boiler running again. The only reason it has not been used i so long is the the zone valve kept getting stuck (would have fixed this myself if i knew!)...
Replies
7
Views
453
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock